


| Parametro | Valore |
|---|---|
| Fan | Yes |
| Nome | CPR-1600-48 |
| Stato | Recommended Model |
| Allarmi | Over Temperature, mains Failure, Output OK |
| Formato | 19"Rack |
| Serie | CPR-1600 |
| Approvazioni | CE, UL |
| Interfaccia | I2C, PMBus |
| Potenza (W) | 1.608,00 |
| Sottoformato | 1U |
| Larghezza (mm) | 85.00 |
| Altezza (mm) | 41.00 |
| Ingresso CA Max | 264,00 |
| Ingresso CA Min | 90,00 |
| Applicazioni | Industrial, Telecommunications |
| Produttore | MEAN WELL |
| Tipo di prodotto | Power supply AC/DC |
| Isolamento (V) | 3.000,00 |
| Tensione di uscita | 48,00 |
| Potenza di picco (W) | One thousand six hundred eight |
| Connettore di ingresso | Pin |
| Frequenza di ingresso | 50 Hz, 60 Hz |
| Lungo/Sfondo | 41.00 |
| Descrizione lunga | Power supply for 19" Rack programmable via ITwoC and PMBus.FormatRack 19".Range of universal input90-264vac.47-63Hz.Output voltage48vdc.Adjustable by potentiometer (47,5-58,8 Vdc) or by external resistance from 40% to 125%or configurable by protocol ITwoC.Output intensity33,5. Range of output current 0-33,5 according To the demand load.Power:1608W.Efficiency typical:93%.Paralelizable up to 3 units with sharing of active current and diode mosfet protection in the Rack RHP-1U.Hot Swapt. Change in hot.Factor corrector, power>0,97to 230vac at full load.Remote on / off.Auxiliary output and 5V 0.3 A.3-color LED charging status indicator.Working temperature: from-30up+70 ° Cof ambient temperature. Consult the technical data sheet to see the curves of drift.Dimensions (Length x Width x Height) [mm]:300 x 85 x 41.5 years of warranty.Manufacturer: MEAN WELL.The power supplies of the series PCR are designed to install in the Rack RHP-1U supports up to 3 sources RCP-1600. These sources allow you to configure the output current through RTwoC and PMBus, and optionally via CANBus. Can be connected in parallel up to 3 sources protected by a diode Mosfet for the protection of the current investment. They have a wide range of temperature from -30ºC up to +70ºC. The tension can also be adjusted via a potentiometer. Have a high efficiency and auxiliary output of 5V. The function Hot-Swap or hot-swap allows us to replace any damaged equipment without having to stop the system, or to increase the power at any time. |
| Connettore di uscita | Screw-Type |
| Tipo di ingresso CA | Single-phase |
| Garanzia (anni) | 5,00 |
| Paese di origine | Taiwan |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo