


| Parametro | Valore |
|---|---|
| Fan | Yes |
| Nome | RCP-1000-48 |
| Stato | Recommended Model |
| Azione | Yes |
| Allarmi | Over Temperature, mains Failure, Output OK |
| Formato | 19"Rack |
| Serie | CPR-1000 |
| Approvazioni | CE, UL |
| Interfaccia | PMBus |
| Potenza (W) | 1.008,00 |
| Sottoformato | 1U |
| Larghezza (mm) | 483.60 |
| Altezza (mm) | 44.00 |
| Ingresso CA Max | 264,00 |
| Ingresso CA Min | 90,00 |
| Applicazioni | Industrial, Telecommunications |
| Produttore | MEAN WELL |
| Tipo di prodotto | Power supply AC/DC |
| Isolamento (V) | 3.000,00 |
| Tensione di uscita | 48,00 |
| Potenza di picco (W) | One thousand eight |
| Connettore di ingresso | Pin |
| Frequenza di ingresso | 50 Hz, 60 Hz |
| Lungo/Sfondo | 350.80 |
| Descrizione lunga | Power supply for Rack 19".FormatRack 19".Range of universal input90-264vac.47-63Hz.Output voltage48vdc.Adjustable by potentiometer (46,3-is 49.7 Vdc) or by external resistance from 90% to 110%.Output intensity21A. Range of output current of 0-21A according to demand load.Power:1008W.Efficiency typical:89%.Paralelizable up to 3 units with sharing of active current and diode mosfet protection in the Rack RCP-1U.Hot Swap. Change in hot.Factor corrector, power>0,97to 230vac at full load.Remote on / off.Auxiliary output and 5V 0.3 A.3-color LED charging status indicator.Working temperature: from-20up+60 ° Cof ambient temperature. Consult the technical data sheet to see the curves of drift.Dimensions (Length x Width x Height) [mm]:295 x 127 x 41.5 years of warranty.Manufacturer: MEAN WELL.The power supplies of the series RCP-1000 are designed to install in the Rack RCP-1U supports up to 3 sources CPR-1000. These sources allow you to configure the stream optionally via ITwoC. can Be connected in parallel up to 3 sources protected by a diode Mosfet for the protection of the current investment. They have a wide range of temperature from -20ºC up to +60ºC. The tension can also be adjusted via a potentiometer. Have a high efficiency and auxiliary output of 5V. The function Hot-Swap or hot-swap allows us to replace any damaged equipment without having to stop the system, or to increase the power at any time. |
| Connettore di uscita | Screw-Type |
| Tipo di ingresso CA | Single-phase |
| Garanzia (anni) | 5,00 |
| Paese di origine | Taiwan |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo