


| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Cavo | Shielded cable with connector, 0.2 m0.656 ftlong |
| Dettagli | Sensor head |
| Prodotto | Compact Type 4 Safety Beam Sensor |
| Materiale | Enclosure: PBT (Polybutylene terephthalate)Lens: AcrylicIndicator cover: Acrylic |
| Numero di parte | ST4-A1-J02V |
| Nome del prodotto | Compact Type 4 Safety Beam Sensor ST4 |
| Tensione di alimentazione | Supplied from controller |
| Numero di prodotto | ST4-A1-J02V |
| Oggetto di rilevamento | φ9 mmφ0.354 inor more opaque object |
| Prolunga del cavo | Extention up to total 50 m164.042 ftis possible for both emitter and receiver with exclusive cable. |
| Gamma operativa | 0.1 to 15 m0.328 to 49.213 ft(Note:The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.) |
| Elemento emittente | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| Illuminazione ambientale | Incandescent lamp: 3,500 Lx or less at the light-receiving face |
| Consumo attuale | Emitter: 11 mA or lessReceiver: 9 mA or less |
| Norme applicabili | IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX. |
| Indicatore di emissione del raggio | Green LED (lights up during beam emission, lights off during emission halt) |
| Angolo di apertura effettivo | plus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2) |
| Indicatore di interruzione del raggio | Red LED (lights up when the beam is interrupted or lock out, lights off during reception)(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output. |
| Indicatore di raggio incidente stabile | Green LED (lights up under stable light received condition, lights off under unstable light received condition) |
| Conformità alla direttiva sulla marcatura CE | Machinery Directive, EMC Directive, RoHS Directive |
| Peso (totale dell'emettitore e del ricevitore) | Net weight: 45 g approx.Gross weight: 60 g approx. |
| Resistenza ambientale: umidità ambientale | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Resistenza ambientale: resistenza agli urti | 300 m/s2acceleration in X, Y and Z directions three times each |
| Resistenza ambientale: temperatura ambiente | -10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: -25 to +70 ℃-13 to +158℉ |
| Resistenza ambientale: Grado di protezione | IP67 (IEC) |
| Resistenza ambientale: resistenza alle vibrazioni | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each< |
| Resistenza ambientale: Resistenza di isolamento | 20 MOhm or more with 500V DC megger between all supply terminals connected together and enclosure |
| Resistenza ambientale: Sopportabilità della tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo