


| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Cavo | 0.3 mm2 5-core cabtyre cable, 2 m 6.562 ft long |
| Produzione | Relay contact 1 c- Switching capacity: 250 V AC 1 A (resistive load), 30 V DC 2 A (resistive load)- Electrical life: 500,000 or more switching operations (switching frequency 3,600 operations/hour), 100,000 or more switching operations (switching frequency 3,600 operations/hour)- Mechanical life: 100 million or more switching operations (switching frequency 36,000 operations/hour) |
| Peso | 140 g approx. |
| Dettagli | Retroreflective [With polarizing filters] |
| Prodotto | Compact Multi-voltage Photoelectric Sensor |
| Materiale | Enclosure: PolycarbonateLens: PolycarbonateCover: PolycarbonateFront cover: Acylic |
| Accessorio | RF-230 (Reflector): 1 pcAdjusting screwdriver: 1 pc |
| Isteresi | - |
| Protezione | IP66 (IEC) |
| Numero di parte | NX5-PRVM5B |
| Nome del prodotto | Compact Multi-voltage Photoelectric Sensor NX5 |
| Tempo di risposta | 10 ms or less |
| Campo di rilevamento | 0.1 to 5 m 0.328 to 16.404 ft(Note) The sensing range and the sensing object of the retroreflective type sensor is specified for the RF-230 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. |
| Numero di prodotto | NX5-PRVM5B |
| Oggetto di rilevamento | dia. 50 mm dia. 1.969 in or more opaque, translucent or specular object(Note) The sensing range and the sensing object of the retroreflective type sensor is specified for the RF-230 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away.(Note) Make sure to confirm detection with an actual sensor before use. |
| Tensione di alimentazione | 24 to 240 V AC +10-15 % or 12 to 240 V DC +10-15 % Ripple P-P 10 % or less |
| Prolunga del cavo | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable |
| Indicatore di alimentazione | - |
| Umidità ambientale | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emittente | Red LED (modulated) |
| Grado di inquinamento | 3 (Industrial environment) |
| Resistenza agli urti | 500 m/s2(50 G approx.) in X, Y and Z directions three times each |
| Consumo energetico | 2 VA or less |
| Illuminazione ambientale | Incandescent light: 3,500 Lx or less at the light-receiving face |
| Temperatura ambiente | -20 to +55 degrees -4 to +131 degrees Fahrenheit (No dew condensation or icing allowed) (Note) , Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit(Note) In case the sensor is to be used at an ambient temperature of -15 degrees +5 degrees Fahrenheit , or less, please contact our office. |
| Indicatore di funzionamento | Red LED (lights up when the output is ON) |
| Indicatore di stabilità | Green LED (lights up under stable light received condition or stable dark condition) |
| Regolatore di sensibilità | Continuously variable adjuster |
| Resistenza alle vibrazioni | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions two hours each |
| Resistenza di isolamento | 20 MOhm , or more, with 500 V DC megger between power supply and output terminals, and between relay contact terminals |
| Output:Operazione di output | Dark-ON |
| Resistenza alla tensione | 1,500 V AC for one min. between power supply and output terminals1,000 V AC for one min. between relay contact terminals |
| Conformità alla direttiva sulla marcatura CE | Low Voltage Directive, EMC Directive, RoHS Directive |
| Elemento emittente: lunghezza d'onda di emissione di picco | 660 nm 0.026 mil |
| Funzione di prevenzione automatica delle interferenze | Incorporated (Two units of sensors can be mounted close together.) |
| Ripetibilità (perpendicolare all'asse di rilevamento) | 0.2 mm 0.008 in or less |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo