Disponibile Prodotto più richiesto
UNA1PK5J-T
UNA1PK5J-T NA1PK5J NA1-PK5-J PANASONIC Area sensor, 25 mm pitch, NPN, 12-24V DC, pigtail cable
$0.00USD
4424 in magazzino
Specifiche chiave
Articolo:Specifications
Cavo:0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong
Produzione:NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Dettagli:NPN output [Standard type]
Informazioni fornitore
PANASONIC
Prodotti: 4316
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico
Specifiche tecniche
| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Cavo | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Produzione | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Dettagli | NPN output [Standard type] |
| Prodotto | Ultra-slim Body Picking Sensor |
| Materiale | Enclosure: Heat-resistant ABSLens cover: AcrylicIndicator cover: Acrylic |
| Passo del fascio | 25 mm0.984 in |
| Protezione | IP62 (IEC) |
| Numero di parte | NA1-PK5-J |
| Nome del prodotto | Ultra-slim Body Picking Sensor NA1-PK5/NA1-5 |
| Tempo di risposta | 10 ms or less (when the interference prevention is used, in Light state: 30 ms or less, in Dark state: 13 ms or less) |
| Campo di rilevamento | 0.1 to 1.2 m 0.328 to 3.937 ft (0.05 to 0.5 m 0.164 to 1.640 ft when set to SHORT)(Note) The sensing range is the possible setting distance between the emitter and the receiver. |
| Numero di prodotto | NA1-PK5-J |
| Rilevamento dell'altezza | 100 mm3.937 in |
| Oggetto di rilevamento | ø35 mmø1.378 inor more opaque object(completely beam interrupted object) |
| Tensione di alimentazione | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Prolunga del cavo | Extension up to total 100 m328.084 ftis possible for both emitter and receiver with 0.3 mm2, or more, cable. |
| Umidità ambientale | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emittente | Infrared LED(Peak emission wavelength: 950 nm0.037 mil, synchronized scanning system) |
| Grado di inquinamento | 3 (Industrial environment) |
| Resistenza agli urti | 490 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Consumo energetico | Emitter: 0.5 W or lessReceiver: 0.8 W or less(Note) Obtain the current consumption by the following equation.Current consumption = Power consumption / Supply voltage(e.g.) When the supply voltage is 12 V, the current consumption of the emitter is0.5 W / 12 V ≈ 0.042 A = 42 mA |
| Indicatori: Emettitore | Power indicator: Green LED (lights up when the power is ON)Job indicator: Orange LED (lights up or blinks when the job indicator input is Low, lighting pattern is selected by operation mode switch) |
| Illuminazione ambientale | Incandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Indicatori: Ricevitore | Operation indicator: Red LED (lights up when one or more beam channels are interrupted, but lights up when two beam channels or more are interrupted in the double-beaminterruption mode)Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)Job indicator: Orange LED (lights up or blinks when the job indicator input is Low, lighting pattern is selected by operation mode switch) |
| Resistenza alle vibrazioni | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Resistenza di isolamento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Numero di canali del fascio | 5 beam channels |
| Output:Operazione di output | ON or OFF when one or more beam channels are interrupted / ON or OFF when two or more beam channels are interrupted, selectable by operation mode switch |
| Resistenza alla tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Output:Categoria di utilizzo | DC-12 or DC-13 |
| Conformità alla direttiva sulla marcatura CE | EMC Directive, RoHS Directive |
| Uscita: protezione da cortocircuito | Incorporated |
| Funzione di prevenzione delle interferenze | Incorporated |
Descrizione del prodotto
Area sensor, 5 beams, 0.1 to 1.2m, 25 mm beam spacing, NPN, 12-24 VDC, cable with M12
Caratteristiche principali
- Qualità di grado industriale
- Conforme RoHS
- Certificato CE
- Garanzia di 1 anno
Documenti del prodotto
Scheda tecnica
Specifiche tecniche e dati di prestazione
Manuale utente
Guida di installazione e utilizzo
