Disponibile Prodotto più richiesto
UNA111PN-T
UNA111PN-T NA111PN NA1-11-PN PANASONIC Cross-beam area sensor, 1 m sensing range 12-24V DC, PNP
$0.00USD
3988 in magazzino
Specifiche chiave
Articolo:Specifications
Cavo:0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong
Produzione:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Peso:Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx.
Informazioni fornitore
PANASONIC
Prodotti: 4316
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico
Specifiche tecniche
| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Cavo | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Produzione | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Peso | Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx. |
| Dettagli | PNP output |
| Prodotto | Small / Slim Object Detection Area Sensor |
| Materiale | Enclosure: Heat-resistant ABSLens: AcrylicIndicator cover: Acrylic |
| Protezione | IP62 (IEC) |
| Numero di parte | NA1-11-PN |
| Nome del prodotto | Small / Slim Object Detection Area Sensor NA1-11 |
| Passo dell'elemento | 10 mm0.394 in |
| Tempo di risposta | In Dark state: 5 ms or lessIn Light state: 10 ms or less |
| Campo di rilevamento | 0.17 to 1 m0.558 to 3.281 ft(Note：The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) |
| Numero di prodotto | NA1-11-PN |
| Rilevamento dell'altezza | 100 mm3.937 in |
| Oggetto di rilevamento | ø13.5 mmø0.531 inor more opaque object(Note：Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) |
| Tensione di alimentazione | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Prolunga del cavo | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. |
| Umidità ambientale | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emittente | Infrared LED (Peak emission wavelength: 880nm0.035mil, cross-beam scanning system) |
| Grado di inquinamento | 3 (Industrial environment) |
| Resistenza agli urti | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Indicatori: Emettitore | Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
| Illuminazione ambientale | Incandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | -10 to 55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Consumo attuale | Emitter: 80 mA or lessReceiver: 100 mA or less |
| Indicatori: Ricevitore | Operation indicator: Orange LED (lights up when the output is ON)Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
| Resistenza alle vibrazioni | 10 to 150 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Resistenza di isolamento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Output:Operazione di output | ON or OFF when beam channel is interrupted, selectable by operation mode switch |
| Resistenza alla tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Output:Categoria di utilizzo | DC-12 or DC-13 |
| Conformità alla direttiva sulla marcatura CE | EMC Directive, RoHS Directive |
| Uscita: protezione da cortocircuito | Incorporated |
| Numero di elementi emettitori/ricevitori | 11 Nos. each on the emitter and the receiver, respectively |
Descrizione del prodotto
CROSSBEAM AREA SENSOR, detection range 1 meter, 12-24 VDC, PNP
Caratteristiche principali
- Qualità di grado industriale
- Conforme RoHS
- Certificato CE
- Garanzia di 1 anno
Documenti del prodotto
Scheda tecnica
Specifiche tecniche e dati di prestazione
Manuale utente
Guida di installazione e utilizzo
