Orario di servizio: Lunedì a Venerdì 9:00-18:00
ULX101 - ULX101 LX101 LX-101 PANASONIC Digtal mark sensor, teach-in, NPN, cable 2m
Disponibile Prodotto più richiesto

ULX101

ULX101 LX101 LX-101 PANASONIC Digtal mark sensor, teach-in, NPN, cable 2m

$0.00USD
3356 in magazzino
Specifiche chiave
Articolo:Specifications
Cavo:0.34 mm25-core cabtyre cable, 2 m6.562 ftlong
Peso:Net weight: 120 g approxGross weight: 180 g approx
Dettagli:Cable type
Informazioni fornitore
PANASONIC
PANASONIC
Prodotti: 4316
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico

Specifiche tecniche

ParametroValore
ArticoloSpecifications
Cavo0.34 mm25-core cabtyre cable, 2 m6.562 ftlong
PesoNet weight: 120 g approxGross weight: 180 g approx
DettagliCable type
ProdottoDigital Mark Sensor
MaterialeEnclosure: PBTDisplay cover: PolycarbonateOperation buttons: Silicone rubberLens: GlassLens holder: Aluminum
AccessorioM4 (length 30 mm1.181 in) screw with washers: 2 pcs.
Dimensione del punto1 x 5 mm 0.039 x0.197 in(at 10 mm0.394 insetting distance)
ProtezioneIP67 (IEC)
Numero di parteLX-101
Nome del prodottoDigital Mark Sensor LX-100
Uscita 1 (OUT)NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 50 mA sink current)
Uscita 2 (OUT)NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 50 mA sink current)
Tempo di rispostaMark mode: 45 micro s or lessColor mode: 150 micro s or less
Campo di rilevamento10 ± 3 mm0.394 ± 0.118 in
Numero di prodottoLX-101
Tensione di alimentazione12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Input didatticoNPN non-contact input- Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less)- Input impedance: 10 kOhm approx.
Funzione timerIncorporated with variable ON-delay / OFF-delay timer,switchable either effective or ineffective(Timer period: 1 to 500 ms, 9 levels variable)
Prolunga del cavoExtension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable.
Display digitale4-digit red LED display
Umidità ambientale35 to 85 % RH, Storage: 35 to 85 % RH
Elemento emittenteCombined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm0.025 mil/ 525 nm0.021 mil/ 470 nm0.019 mil)
Resistenza agli urti500 m/s2acceleration (50 G approx.) in X, Y and Z directionsthree times each
Illuminazione ambientaleIncandescent light: 3,000 lx or less at the light-receiving face
Temperatura ambiente-10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉
Consumo attualeNormal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
Impostazione della sensibilitàMark mode: 2-level teaching / Full-auto teachingColor mode: 1-level teaching
Resistenza alle vibrazioni10 to 500 Hz frequency, 3.0 mm0.118 indouble amplitude (max. 20 G) in X, Y and Z directions for two hours each
Resistenza alla tensione1,000 V AC for one min. between all supply terminals connected together and enclosure
Uscita 1: operazione di uscitaMark mode: Light-ON / Dark-ON (Auto-setting on teaching)Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
Uscita 2: operazione di uscitaInverted operation of the output 1
Conformità alla direttiva sulla marcatura CEEMC Directive, RoHS Directive
Uscita 1: Protezione da cortocircuitoIncorporated
Uscita 2: Protezione da cortocircuitoIncorporated
Funzione di regolazione fine della sensibilitàIncorporated

Descrizione del prodotto

Sensor for mark/color detection, automatic RGB optical LED selection, cable, NPN
Caratteristiche principali
  • Qualità di grado industriale
  • Conforme RoHS
  • Certificato CE
  • Garanzia di 1 anno

Documenti del prodotto

Scheda tecnica

Specifiche tecniche e dati di prestazione

Manuale utente

Guida di installazione e utilizzo

Top