Disponibile Prodotto più richiesto
UHLG112SJ
UHLG112SJ HL-G112-S-J PANASONIC Compact Laser Displacement Sensor, High functionality type, 120 mm, with con..
$0.00USD
3623 in magazzino
Specifiche chiave
Articolo:Specifications
Tipo:High functionality type
Cavo:14-core cabtyre cable with connector, 0.5 m1.640 ftlong
Osservazione:Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃+68 ℉, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic and analog measurement values.
Informazioni fornitore
PANASONIC
Prodotti: 4316
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico
Specifiche tecniche
| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Tipo | High functionality type |
| Cavo | 14-core cabtyre cable with connector, 0.5 m1.640 ftlong |
| Osservazione | Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃+68 ℉, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic and analog measurement values. |
| Peso | Net weight: 70 g approx. (not including cable), 110 g approx. (including cable)Gross weight: 160 g approx. |
| Dettagli | Sensor head (High functionality type) |
| Prodotto | Compact Laser Displacement Sensor |
| Materiale | Enclosure: PBTFront cover: AcrylicCable: PVC |
| Accessorio | Warning label: 1 set |
| Linearità | ± 0.1 % F.S. |
| Risoluzione | 8 μm0.315 mil |
| Ingresso multiplo | Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.In case NPN output is selected, Function varies according to the time 0 V is connected NPN.In case PNP output is selected, Function varies according to the time external power + is connected. |
| Numero di parte | HL-G112-S-J |
| Fonte di luce | Red semiconductor laser, Class 2 (IEC / EN / JIS / GB / KS / FDA (Note：This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.Max. output: 1 mW (Peak emission wavelength: 655 nm0.026 mil) |
| Nome del prodotto | Compact Laser Displacement Sensor HL-G1 |
| Input di temporizzazione | NPN output operates when 0V is connected and NPN is set. (It depends on the setting.)PNP output operates when external power + is connected and PNP is set. (It depends on the setting.) |
| Diametro del raggio | 1.0 × 1.5 mm0.039 x 0.059 in(Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2(13.5 %) of the center light intensity. Ifthere is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than thesensing point itself, then the results may be affected. |
| Frequenza di campionamento | 200 μs, 500 μs, 1 ms, 2 ms |
| Numero di prodotto | HL-G112-S-J |
| Tensione di alimentazione | 24 V DC ± 10 % including ripple 0.5 V (P-P) |
| Prolunga del cavo | Extension up to total 20 m65.617 ftis possible with optional cable. |
| Display digitale | Red LED 5 digit display |
| Campo di misura | ± 60 mm± 2.362 in |
| Indicatore: Allarme | Orange LED lights up when this product cannot measure because of insuffienct or excessive light intensity. |
| Elemento ricevente | CMOS image sensor |
| Altitudine operativa | 2,000 m6561 ftor less |
| Consumo attuale | 100 mA or less |
| Grado di inquinamento | 2 |
| Resistenza di isolamento | 20 MOhm , or more, with 250 V DC between all supply teminals connected together and enclosure |
| Conformità normativa | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Uscita analogica: corrente | Output range: 3.2 to 20.8 mA (normal), 21.6 mA (alarm)Load impedance: 300 Ω or less |
| Uscita analogica: tensione | Output range: 0 to +10.5 V (normal), 11 V (alarm)Output impedance: 100 Ohm |
| Interfaccia di comunicazione | RS-422 or RS-485 (selectable)Baud rate: 9,600/19,200/38,400/115,200/230,400/460,800/921,600 bpsData length 8 bit, Stop bit length 1 bit, Without parity check, BCC check, Termination code: CR |
| Resistenza alla tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Indicatore: Emissione laser | Green LED (lights up during laser emission) |
| Distanza dal centro di misura | 120 mm4.724 in |
| Caratteristiche di temperatura | ± 0.08 % F.S. / ℃ |
| Indicatore: Campo di misura | Three yellow LED |
| Impostazione della polarità di uscita in ingresso | NPN open collector output operates when 0 V is connected.PNP open collector output operates when 24 V DC is connected. |
| Uscite (OUT 1, OUT 2, OUT 3) | Judgment output or alarm output (Setting can be selected.)Selectable NPN transistor open-collector or PNP transistor open-collector<In case of using NPN output>-Maximum sink current: 50 mA-Applied voltage: 3 to 24 V DC (between output and 0 V)-Residual voltage: 2 V or less (at 50 mA of sink current)<In case of using PNP output>-Maximum source current: 50 mA-Residual voltage: 2.8 V or less (at 50 mA of source current) |
| Resistenza ambientale: Protezione | IP67 |
| Resistenza ambientale: Umidità ambientale | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Resistenza ambientale: Resistenza agli urti | 500 m/s2acceleration (50 G approx.) in X,Y and Z directions three times each |
| Resistenza ambientale: Illuminazione ambientale | Incandescent light: 3,000 liter x or less at the light-receiving face(Note) The fluctuation by ambient illuminance is ± 0.1 % F.S. or less. |
| Resistenza ambientale: Temperatura ambiente | -10 to +45 ℃+14 to +113 ℉(No dew condensation allowed), Storage: -20 to +60 ℃-4 to +140 ℉ |
| Resistenza ambientale: Resistenza alle vibrazioni | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm0.059 indouble amplitude in X,Y and Z directions for two hours each |
| Uscita (OUT 1, OUT 2, OUT 3): funzionamento dell'uscita | Opened when the amount of light is insufficient. |
| Uscita (OUT 1, OUT 2, OUT 3): protezione da cortocircuito | Incorporated (automatic restoration) |
Descrizione del prodotto
CMOS class 2 measuring laser, IP67, Diffuse Reflection, built-in display and amplifier, 2 s. analog, 3 selectable digital outputs PNP/NPN, RS422/RS485, measurement range: 120 ± 60 mm, resolution: 8μm.
Caratteristiche principali
- Qualità di grado industriale
- Conforme RoHS
- Certificato CE
- Garanzia di 1 anno
Documenti del prodotto
Scheda tecnica
Specifiche tecniche e dati di prestazione
Manuale utente
Guida di installazione e utilizzo
