Disponibile Prodotto più richiesto
UFZ11P
UFZ11P FZ11P FZ-11P PANASONIC UZF605, color sensor amplifier (Teach-In, PNP, cable 2m)
$0.00USD
3727 in magazzino
Specifiche chiave
Articolo:Specifications
Cavo:0.2 mm23-core cabtyre cable, 2 m328.084 ftlong
Produzione:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Peso:Net weight: 85 g approx.
Informazioni fornitore
PANASONIC
Prodotti: 4316
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico
Specifiche tecniche
| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Cavo | 0.2 mm23-core cabtyre cable, 2 m328.084 ftlong |
| Produzione | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Peso | Net weight: 85 g approx. |
| Dettagli | Amplifier [PNP output] |
| Prodotto | Color Detection Fiber Sensor |
| Materiale | Enclosure: ABSCase cover: PolycarbonateFiber lock lever: PPS |
| Insegnamento | Button operation, Switchable either manual-teaching or auto-teaching |
| Accessorio | MS-DIN-3 (Amplifier mounting bracket): 1 pc.Adjusting screwdriver: 1 pc. |
| Tolleranza | Adjustable in 16 grades with the tolerance adjuster |
| Indicatori | Power indicator: Green LED (lights up when the power is ON, blinks during auto-teaching)Operation indicator: Red LED (lights up when the output is ON)* Both blink alternately when a manual teaching error occursBoth blink simultaneously when the output is short-circuited |
| Numero di parte | FZ-11P |
| Nome del prodotto | Color Detection Fiber Sensor FZ-10 |
| Tempo di risposta | 1 ms or less (3 ms or less when auto-teaching has been engaged) |
| Numero di prodotto | FZ-11P |
| Oggetto di rilevamento | Opaque or translucent object larger than the spot diameter of the applicable fiber(Note) Make sure to confirm detection with an actual sensor before use. |
| Tensione di alimentazione | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Funzione timer | Approx. 40 ms fixed OFF-delay timer (switchable either effective or ineffective) |
| Prolunga del cavo | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Umidità ambientale | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emittente | Red LED / Green LED / Blue LED (Peak emission wavelength: 644 nm0.025 mil/ 525 nm0.021 mil/ 470 nm0.019 mil, modulated) |
| Resistenza agli urti | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Fibre applicabili | FD-L51, FD-L52, FD-L53, FD-L54 |
| Illuminazione ambientale | Incandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed) (Note) , Storage: -20 to +70 ℃-4 to +158 ℉(Note) The amplifier should be used under the ambient temperature of +15 to +35 ℃+59 to +95 ℉when the tolerance adjuster is set from the 1st grade to the 4th grade, which provide fine color resolution. |
| Consumo attuale | 45 mA or less |
| Resistenza alle vibrazioni | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Resistenza di isolamento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Output:Operazione di output | Switchable either Coincident-ON or Incoincident-ON |
| Resistenza alla tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Output:Categoria di utilizzo | DC-12 or DC-13 |
| Conformità alla direttiva sulla marcatura CE | EMC Directive, RoHS Directive |
| Uscita: protezione da cortocircuito | Incorporated |
Descrizione del prodotto
FZ-10 Amplifier F. Chromatic optics, PNP, 12-24 VDC, cable
Caratteristiche principali
- Qualità di grado industriale
- Conforme RoHS
- Certificato CE
- Garanzia di 1 anno
Documenti del prodotto
Scheda tecnica
Specifiche tecniche e dati di prestazione
Manuale utente
Guida di installazione e utilizzo
