Disponibile Prodotto più richiesto
UFX311P
UFX311P FX311P FX-311P PANASONIC Fiber amplifier, PNP, 12-turn potentiometer, connector type
$0.00USD
3228 in magazzino
Specifiche chiave
Articolo:Specifications
Produzione:PNP open-collector transistor• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Peso:Net weight: 15 g approx., Gross weight: 20 g approx.
Dettagli:PNP output
Informazioni fornitore
PANASONIC
Prodotti: 4316
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico
Specifiche tecniche
| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Produzione | PNP open-collector transistor• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)] |
| Peso | Net weight: 15 g approx., Gross weight: 20 g approx. |
| Dettagli | PNP output |
| Prodotto | Manually Set Fiber Sensor |
| Materiale | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate |
| Numero di parte | FX-311P |
| Lunghezza del cavo | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Nome del prodotto | Manually Set Fiber Sensor FX-311 |
| Tempo di risposta | 250 μs or less (STD / S-D), 2 ms or less (LONG) selectable with selection switch |
| Numero di prodotto | FX-311P |
| Tensione di alimentazione | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Funzione timer | Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective |
| Umidità ambientale | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Resistenza agli urti | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
| Metodo di connessione | Connector(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft) |
| Consumo energetico | 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage) |
| Illuminazione ambientale | Incandescent light: 3,000 ℓx at the light-receiving face |
| Temperatura ambiente | -10 to +55 ℃ -14 to +131 ℉(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)Storage: -20 to +70 ℃ -4 to +158 ℉ |
| Indicatore di funzionamento | Orange LED (lights up when the output is ON) |
| Indicatore di stabilità | Green LED (lights up under stable light received condition or stable dark condition) |
| Regolatore di sensibilità | 12-turn potentiometer with indicator (Pointer part: red backlight)(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted. |
| Resistenza alle vibrazioni | 10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each |
| Resistenza di isolamento | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Output:Operazione di output | Selectable either Light-ON or Dark-ON, with selection switch |
| Resistenza alla tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Elemento emittente (modulato) | Red LED |
| Uscita: protezione da cortocircuito | Incorporated |
| Funzione di prevenzione automatica delle interferenze | Incorporated (Up to 4 sets of fiber heads can be mounted close together.)(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention. |
| Elemento emittente (modulato): lunghezza d'onda di emissione di picco | 650 nm 0.026 mil |
Descrizione del prodotto
FX-311 Amplifier F. Optics, red led, PNP, 12-24 VDC, connector
Caratteristiche principali
- Qualità di grado industriale
- Conforme RoHS
- Certificato CE
- Garanzia di 1 anno
Documenti del prodotto
Scheda tecnica
Specifiche tecniche e dati di prestazione
Manuale utente
Guida di installazione e utilizzo
