


| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Cavo | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
| Produzione | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) |
| Peso | Net weight: 20 g approxGross weight: 45 g approx |
| Dettagli | Retroreflective[Side sensing] |
| Prodotto | Ultra-compact Photoelectric Sensor |
| Materiale | Enclosure: Polyethylene terephthalateLens: Polyalylate |
| Accessorio | RF-200 (Reflector): 1 pcAdjusting screwdriver: 1 pc |
| Isteresi | - |
| Protezione | IP67 (IEC) |
| Numero di parte | EX-29A-PN |
| Nome del prodotto | Ultra-compact Photoelectric Sensor EX-20 Ver.2 |
| Tempo di risposta | 0.5 ms or less |
| Campo di rilevamento | 30 to 200 mm 1.181 to 7.874 in(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque. |
| Numero di prodotto | EX-29A-PN |
| Oggetto di rilevamento | dia. 15 mm dia. 0.591 in or more opaque or translucent object(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque.(Note) Make sure to confirm detection with an actual sensor before use. |
| Tensione di alimentazione | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Prolunga del cavo | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. |
| Umidità ambientale | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emittente | Red LED (modulated) |
| Resistenza agli urti | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Illuminazione ambientale | Incandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit |
| Consumo attuale | 13 mA or less |
| Indicatore di funzionamento | Orange LED (lights up when the output is ON) |
| Indicatore di stabilità | Green LED (lights up under stable light received condition or stable dark condition) |
| Regolatore di sensibilità | Continuously variable adjuster |
| Resistenza alle vibrazioni | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (20 G max.) in X, Y and Z directions for two hours each |
| Resistenza di isolamento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Interruttore della modalità di funzionamento | - |
| Resistenza alla tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Output:Categoria di utilizzo | DC-12 or DC-13 |
| Conformità alla direttiva sulla marcatura CE | EMC Directive, RoHS Directive |
| Uscita: protezione da cortocircuito | Incorporated |
| Elemento emittente: lunghezza d'onda di emissione di picco | 680 nm 0.027 mil |
| Ripetibilità (perpendicolare all'asse di rilevamento) | 0.5 mm 0.020 in or less |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo