


| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Cavo | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
| Produzione | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) |
| Peso | Net weight: 20 g approxGross weight: 45 g approx |
| Dettagli | Diffuse reflective[Side sensing] |
| Prodotto | Ultra-compact Photoelectric Sensor |
| Materiale | Enclosure: Polyethylene terephthalateLens: Polyalylate |
| Accessorio | Adjusting screwdriver: 1 pc |
| Isteresi | 15 % or less of operation distance [200 x 200 mm 7.874 x 7.874 in with white non-glossy paper] |
| Protezione | IP67 (IEC) |
| Numero di parte | EX-22B |
| Nome del prodotto | Ultra-compact Photoelectric Sensor EX-20 Ver.2 |
| Tempo di risposta | 0.5 ms or less |
| Campo di rilevamento | 5 to 160 mm 0.197 to 6.299 in (Note) with white non-glossy paper (200 x 200 mm) (7.874 x 7.874 in)(Note) In case of using this product at a sensing range of 50 mm 1.969 in or less, take care that the sensitivity adjustment range becomes extremely narrow. |
| Numero di prodotto | EX-22B |
| Oggetto di rilevamento | Opaque,translucent or transparent object(Note) Make sure to confirm detection with an actual sensor before use. |
| Tensione di alimentazione | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Prolunga del cavo | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. |
| Umidità ambientale | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emittente | Red LED (modulated) |
| Resistenza agli urti | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Illuminazione ambientale | Incandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit |
| Consumo attuale | 13 mA or less |
| Indicatore di funzionamento | Orange LED (lights up when the output is ON) |
| Indicatore di stabilità | Green LED (lights up under stable light received condition or stable dark condition) |
| Regolatore di sensibilità | Continuously variable adjuster |
| Resistenza alle vibrazioni | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (20 G max.) in X, Y and Z directions for two hours each |
| Resistenza di isolamento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Interruttore della modalità di funzionamento | - |
| Resistenza alla tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Output:Categoria di utilizzo | DC-12 or DC-13 |
| Conformità alla direttiva sulla marcatura CE | EMC Directive, RoHS Directive |
| Uscita: protezione da cortocircuito | Incorporated |
| Elemento emittente: lunghezza d'onda di emissione di picco | 680 nm 0.027 mil |
| Ripetibilità (perpendicolare all'asse di rilevamento) | 0.3 mm 0.012 in or less |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo