Disponibile Prodotto più richiesto
UEQ511T-T
UEQ511T-T EQ511T EQ-511T PANASONIC Trigonometric diffuse reflective type 2,5m, with timer function, NPN/ PNP..
$0.00USD
4946 in magazzino
Specifiche chiave
Articolo:Specifications
Cavo:Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in
Produzione:NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Peso:Net weight: 85 g approx.
Informazioni fornitore
PANASONIC
Prodotti: 4316
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico
Specifiche tecniche
| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Cavo | Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in |
| Produzione | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Peso | Net weight: 85 g approx. |
| Dettagli | DC-voltage [With timer] |
| Prodotto | Adjustable Range Reflective Photoelectric Sensor |
| Materiale | Enclosure: ABSFront cover: PolycarbonateDisplay cover: Polycarbonate |
| Accessorio | Adjusting screwdriver: 1 pc. |
| Isteresi | 10 % or less of operation distance(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Protezione | IP67 (IEC) |
| Numero di parte | EQ-511T |
| Lunghezza del cavo | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cabtyre cable. |
| Nome del prodotto | Adjustable Range Reflective Photoelectric Sensor EQ-500 |
| Modalità di rilevamento | Switchable either BGS or FGS function |
| Tempo di risposta | 2 ms or less (depends on the setting timer period) |
| Numero di prodotto | EQ-511T |
| Tensione di alimentazione | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Funzione timer | Incorporated with variable (0.1 to 5 sec.) ON-delay/OFF-delay timer |
| Gamma regolabile | 0.2 to 2.5 m0.656 to 8.202 ft(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m0.328 ft, or more, away.(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
| Umidità ambientale | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Elemento emittente | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, modulated) |
| Resistenza agli urti | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Metodo di connessione | Screw-on terminal connection |
| Regolatore di distanza | 2-turn mechanical adjuster with indicator |
| Elemento ricevente | 2-segment photodiode |
| Illuminazione ambientale | Incandescent light: 3,000 Lx or less at the light-receiving face |
| Temperatura ambiente | –20 to +55 ℃–4 to +131℉(No dew condensation or icing allowed),Storage: –30 to +70 ℃–22 to +158℉ |
| Indicatore di funzionamento | Orange LED (lights up when the output is ON) |
| Indicatore di stabilità | Green LED (lights up under stable operating condition) |
| Resistenza alle vibrazioni | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Resistenza di isolamento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Output:Operazione di output | Switchable either Detection-ON or Detection-OFF |
| Resistenza alla tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Consumo di corrente / potenza | 45 mA or less |
| Conformità alla direttiva sulla marcatura CE | EMC Directive, RoHS Directive |
| Uscita: protezione da cortocircuito | Incorporated |
| Funzione di prevenzione automatica delle interferenze | Incorporated(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| Campo di rilevamento (alla massima distanza di impostazione) | 0.1 to 2.5 m0.328 to 8.202 ft(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
Descrizione del prodotto
Trigonometric photoelectric sensor, direct detection with background suppression and long range, 2.5m, power supply 12-24VDC, selectable NPN/PNP output, IP67, , FGS and BGS functions, timer
Caratteristiche principali
- Qualità di grado industriale
- Conforme RoHS
- Certificato CE
- Garanzia di 1 anno
Documenti del prodotto
Scheda tecnica
Specifiche tecniche e dati di prestazione
Manuale utente
Guida di installazione e utilizzo
