Disponibile Prodotto più richiesto
UDP102AMP
UDP102AMP DP-102A-M-P PANASONIC Pressure sensor, -1 to 10bar, 0,6 to 5V, PNP, Pressure connector short M5 fe..
$0.00USD
3787 in magazzino
Specifiche chiave
Articolo:Specifications
Peso:Net weight: 30 g approx., Gross weight: 120 g approx.
Dettagli:Short pressure port type
Display:4 digits + 4 digits 3-color LCD display(Display refresh rate : 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Informazioni fornitore
PANASONIC
Prodotti: 4316
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico
Specifiche tecniche
| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Peso | Net weight: 30 g approx., Gross weight: 120 g approx. |
| Dettagli | Short pressure port type |
| Display | 4 digits + 4 digits 3-color LCD display(Display refresh rate : 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| Prodotto | Dual Display Digital Pressure Sensor [For Gas] |
| Materiale | Enclosure : PBT (glass fiber reinforced), LCD display : Acrylic, Pressure port : Stainless steel (SUS303), Mounting threaded part : Brass (nickel plated), Switch part : Silicone rubber |
| Indicatore | Orange LED(Comparative output 1 operation indicator : Lights up when comparative output is ON, Analog voltage output operation indicator : Lights up when setting) |
| Protezione | IP40 (IEC) |
| Accessori | CN-14A-C2 (Connector attached cable 2 m6.562 ft): 1pc. (excluding M8 plug-in connector type) |
| Numero di parte | DP-102A-M-P |
| Lunghezza del cavo | Total length up to 100 m328.084 ft(less than 30 m98.425 ftwhen conforming to CE marking) is possible with 0.3 mm2, or more, cable |
| Nome del prodotto | Dual Display Digital Pressure Sensor [For Gas] DP-100 |
| Input esterno | <PNP output>ON voltage : 5 V to +V DCOFF voltage : 0.6 V DC or less, or openInput impedance : 10 kΩ approx.Input time : 1 ms or more |
| Numero di prodotto | DP-102A-M-P |
| Tensione di alimentazione | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Umidità ambientale | 35 to 85 % RH (No dew condensation or icing allowed), Storage : 35 to 85 % RH |
| Fluido applicabile | Non-corrosive gas |
| Resistenza agli urti | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Tipo di pressione | Gauge pressure |
| Metodo di collegamento | Connector |
| Consumo energetico | Normal operation :720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode :480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage) |
| Output comparativo | <PNP output>PNP open-collector transistor- Maximum source current : 100 mA- Applied voltage : 30 V DC or less (between comparative output and +V)- Residual voltage : 2 V or less (at 100 mA source current) |
| Imposta intervallo di pressione | -0.101 to +1.010 MPa-101 to +1,010 kPa-1.03 to +10.30 kgf/cm2-1.01 to +10.10 bar-14.6 to +146.4 psi |
| Temperatura ambiente | -10 to +50 ℃+14 to +122 ℉, Storage : -10 to +60 ℃+14 to +140 ℉ |
| Intervallo di pressione nominale | -0.100 to +1.000 MPa |
| Resistenza alle vibrazioni | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each(when panel is mounted: 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each) |
| Uscita di corrente analogica | Output current : 2.4 to 20 mAZero point : 4 mA ±5 % F.S.Span : 17.6 mA ±5 % F.S.Linearity : within ±1 % F.S.Load resistance : 250 Ω (max.) |
| Uscita di tensione analogica | Output voltage : 0.6 to 5 VZero point : within 1 V ±5 % F.S.Span : within 4.4 V ±5 % F.S.Linearity : within ±1 % F.S.Output impedance : 1 kΩ approx. |
| Resistenza di isolamento | 50MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure |
| Resistenza alla tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Resistenza alla pressione | 1.5 MPa |
| Caratteristiche della temperatura | Within ±1 % F.S.(at +20 ℃+68 ℉) |
| Uscita comparativa: isteresi | Minimum 1 digit (variable)(however, 2 digits when using psi unit) |
| Output comparativo: Modalità di output | EASY mode / Hysteresis mode / Window comparator mode |
| Output comparativo: ripetibilità | ±0.2 % F.S.(within ±2 digits) |
| Output comparativo: Tempo di risposta | 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation |
| Display: intervallo di pressione visualizzabile | -0.101 to +1.010 MPa-101 to +1,010 kPa-1.03 to +10.30 kgf/cm2-1.01 to +10.10 bar-14.6 to +146.4 psi |
| Output comparativo: operazione di output | NO / NC (selectable by key operation) |
| Conformità normativa e certificazione | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Uscita comparativa: protezione da cortocircuito | Incorporated |
Descrizione del prodotto
DP100 series dual digital pressure controller, flat model, multifunction, -0.1 to 1MPa, PNP. Port M5.
Caratteristiche principali
- Qualità di grado industriale
- Conforme RoHS
- Certificato CE
- Garanzia di 1 anno
Documenti del prodotto
Scheda tecnica
Specifiche tecniche e dati di prestazione
Manuale utente
Guida di installazione e utilizzo
