


| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| Produzione | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) |
| Dettagli | Diffuse reflective |
| Prodotto | Compact Photoelectric Sensor |
| Materiale | Enclosure: PBT (polybutylene terephthalate)Lens: acrylicIndicator cover: acrylic |
| Accessorio | - |
| Isteresi | 15 % or less of operation distance(Note) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm7.874 × 7.874 in) as the object. |
| Protezione | IP67 (IEC) |
| Numero di parte | CX-421-P-J |
| Nome del prodotto | Compact Photoelectric Sensor CX-400 Ver.2 |
| Tempo di risposta | 1 ms or less |
| Campo di rilevamento | 300 mm11.811 in(Note) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm7.874 × 7.874 in) as the object. |
| Numero di prodotto | CX-421-P-J |
| Oggetto di rilevamento | Opaque, translucent or transparent object(Note) Make sure to confirm detection with an actual sensor before use. |
| Tensione di alimentazione | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Indicatore di alimentazione | - |
| Umidità ambientale | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Resistenza agli urti | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Illuminazione ambientale | Incandescent light: 3,000 lx or less at the light-receiving face |
| Temperatura ambiente | - 25 to +55℃-13 to +131℃ ℉(No dew condensation or icing allowed ), Storage: -30 to +70℃-22 to +158℃ ℉ |
| Consumo attuale | 13 mA or less |
| Indicatore di funzionamento | Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) |
| Indicatore di stabilità | Green LED(lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) |
| Regolatore di sensibilità | Continuously variable adjuster(incorporated on the receiver for thru-beam type) |
| Resistenza alle vibrazioni | 10 to 500 Hz frequency, 1.5 mm0.059 inamplitude (10 G max.) in X, Y and Z directions for two hours each |
| Resistenza di isolamento | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Output:Operazione di output | Switchable either Light-ON or Dark-ON |
| Resistenza alla tensione | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Elemento emittente (modulato) | Infrared LED |
| Conformità alla direttiva sulla marcatura CE | EMC Directive, RoHS Directive |
| Uscita: protezione da cortocircuito | Incorporated |
| Funzione di prevenzione automatica delle interferenze | Incorporated(Two units of sensors can be mounted close together.) |
| Ripetibilità (perpendicolare all'asse di rilevamento) | 1 mm0.039 inor less |
| Elemento emittente (modulato): lunghezza d'onda di emissione di picco | 860 nm0.034 mil |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo