


| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| PFHD | 1.66 × 10-10(Note:Probability of dangerous failure per hour) |
| MTTFD | 100 years or more(Note:Mean time to dangerous failure (in years)) |
| Peso | Net weight: 250 g approx. |
| Dettagli | Applicantion expansion unit for the SF4B series |
| Prodotto | Exclusive Control Unit for Safety Light Curtain |
| Materiale | Enclosure: ABS |
| Numero di parte | SF-C14EX |
| Nome del prodotto | Exclusive Control Unit for Safety Light Curtain SF-C10 |
| Tensione di alimentazione | 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Numero di prodotto | SF-C14EX |
| Umidità ambientale | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Categoria di controllo | ISO 13849-1 (EN ISO 13849-1, JIS B 9705-1) compliance up to Category 4, PLe standards |
| Resistenza agli urti | 30 G acceleration in X, Y and Z directions three times each |
| Uscita lampada di silenziamento | Applicable muting lamp: 24 V DC, 3.6 to 30 W (L1, L2 of each unit) |
| Temperatura ambiente | -10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: -25 to +70 ℃-13 to +158 ℉ |
| Terminale di collegamento | Detachable spring-cage terminal |
| Consumo attuale | 0.2 A or less (Excluding Safety light curtain and other external connecting device) |
| Resistenza alle vibrazioni | 10 to 55 Hz frequency, 0.35 mm0.014 indouble amplitude in X, Y and Z directions for two hours each |
| Resistenza di isolamento | 20 MOhm , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Norme applicabili: Giappone | JIS B 9704-1 (Type 4), JIS B 9705-1 (Category 4, PLe) |
| Conformità alla direttiva sulla marcatura CE | Machinery Directive, EMC Directive, RoHS Directive |
| Norme applicabili: Europa (UE) | EN 55011, EN ISO 13849-1 (Category 4, PLe) |
| Barriere fotoelettriche di sicurezza collegabili | SF4B / SF4B-Gseries(Note:The handy-controllerSFB-HC(optional) cannot be used withSF-C14EX-01.) |
| Norme applicabili: Nord America | ANSI/UL 61496-1 (Type 4), UL 1998 (Class 2) |
| Uscita lampada di silenziamento: circuito di protezione | Incorporated |
| Norme applicabili: Norma internazionale | IEC 61496-1 (Type 4), IEC 61496 (Type 4),ISO 13849-1 (Category 4, PLe) |
| Resistenza ambientale: Grado di protezione | Enclosure: IP40Terminal: IP20 |
| Resistenza ambientale: tensione di rigidità dielettrica | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Uscite di sicurezza (Uscita di sicurezza 1, Uscita di sicurezza 2, Uscita di sicurezza 3) | PNP open-collector transistor 2 outputs × 3 or NPN open-collector transistor 2 outputs × 3 (selectable using a slider switch)<When PNP output is selected>・Maximum source current: 200 mA・Applied voltage: same as supply voltage(between the safety output and +V)・Residual voltage: 2 V or less (at 200 mA source current)<When NPN output is selected>・Maximum sink current: 200 mA・Applied voltage: same as supply voltage(between the safety output and 0 V)・Residual voltage: 2 V or less (at 200 mA sink current) |
| Uscite di sicurezza (Uscita di sicurezza 1, Uscita di sicurezza 2, Uscita di sicurezza 3): Tempo di risposta | OFF response: 14 ms or less (Safety output 1 and 2: including the response time of the Safety light curtain)ON response: 90 ms or less (auto-reset) / 140 ms or less (manual reset) (Note)(Note) The auto-reset cannot be used with safety output 3. |
| Uscite ausiliarie (Uscita ausiliaria 1, Uscita ausiliaria 2, Uscita ausiliaria 3, Uscita ausiliaria 4) | PNP open-collector transistor × 3 or NPN open-collector transistor × 3 (selectable using a slider switch)<When PNP output is selected>・Maximum source current: 60 mA・Applied voltage: same as supply voltage(between the auxiliary output and +V)・Residual voltage: 2 V or less (at 60 mA source current)<When NPN output is selected>・Maximum sink current: 60 mA・Applied voltage: same as supply voltage(between the auxiliary output and 0 V)・Residual voltage: 2 V or less (at 60 mA sink current) |
| Uscite di sicurezza (Uscita di sicurezza 1, Uscita di sicurezza 2, Uscita di sicurezza 3): Modalità di funzionamento (Funzionamento dell'uscita) | Safety output 1: ON when the safety light curtain is in light receiving condition, OFF when the safety light curtain is in light interrupted condition (Note 3)Safety output 2: ON when the safety light curtain is in light receiving condition or the muting function is validOFF when the safety light curtain is in light interrupted condition and the muting function is invalid (Note 3)Safety output 3: ON when the emergency stop is invalid, OFF when the emergency stop is valid |
| Uscite di sicurezza (uscita di sicurezza 1, uscita di sicurezza 2, uscita di sicurezza 3): circuito di protezione (protezione da cortocircuito) | Incorporated |
| Uscite ausiliarie (Uscita ausiliaria 1, Uscita ausiliaria 2, Uscita ausiliaria 3, Uscita ausiliaria 4): Modalità di funzionamento (Funzionamento dell'uscita) | Auxiliary output 1: ON when the muting function is invalid, OFF when the muting function is validAuxiliary output 2: ON when the override function is invalid, OFF when the override function is validAuxiliary output 3: ON when the muting lamp is normal, OFF when the muting lamp is errorAuxiliary output 4: ON when the light curtain is in light interrupted condition, OFF when the light curtain is in light receiving condition(Note:The auxiliary output incorporated in theSF4Bseries is output.) |
| Uscite ausiliarie (uscita ausiliaria 1, uscita ausiliaria 2, uscita ausiliaria 3, uscita ausiliaria 4): circuito di protezione (protezione da cortocircuito) | Incorporated |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo