![SF4D-H56-01 - SF4D-H56-01 PANASONIC Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D](http://www.baigongbaohao.com/pic/684/772/sf4d-h56-01.jpg)
Disponibile Prodotto più richiesto
SF4D-H56-01
SF4D-H56-01 PANASONIC Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D
$0.00USD
4607 in magazzino
Specifiche chiave
Articolo:Specifications
PFHD:2.78×10-9
MTTFD:426 years or more
Osservazione:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years).
Informazioni fornitore
PANASONIC
Prodotti: 4316
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico
Specifiche tecniche
| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| PFHD | 2.78×10-9 |
| MTTFD | 426 years or more |
| Osservazione | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years). |
| Dettagli | Min. sensing object ø25 mmø0.984 in(20 mm0.787 inbeam pitch) |
| Prodotto | Safety Light Curtain [Type 4 PLe SIL3] |
| Materiale | Enclosure : Aluminum, Detection surface : Polycarbonate resin and stainless steel (SUS304), Upper cap / lower cap : Nylon |
| Accessori | SF4B-TR25 (test rod) : 1 pc. |
| Numero di parte | SF4D-H56-01 |
| Nome del prodotto | Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D |
| Stato di sicurezza | Control output (OSSD 1 / 2) OFF state |
| Tensione di alimentazione | 24 V DC+20-30 %Ripple P-P 10 % or less (excluding voltage drop due to cable)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| Numero di prodotto | SF4D-H56-01 |
| Tipo di sottosistema | Type B (IEC 61508-2) |
| Prolunga del cavo | Total length of emitter / receiver can be extended up to 70 m229.659 fteach using optional mating cable (including the lengthof series mating cables)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| Funzione di disattivazione audio | Incorporated (12-core cable) |
| Gamma operativa | Short mode : 0.2 to 9 m0.656 to 29.528 ftLong mode : 0.8 to 15 m2.625 to 49.213 ft(selectable by DIP switch)(Note): The operating range is the possible setting distance between the emitter and the receiver. |
| Umidità ambientale | 30 to 85 % RH, Storage : 30 to 95 % RH |
| Elemento emittente | Infrared LED (peak emission wavelength : 850 nm0.0335 mil) |
| Grado di inquinamento | 3 |
| Resistenza agli urti | 300 m/s2acceleration (30 G approx.) in X, Y, and Z directions three times eachMalfunction resistance 100 m/s2acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each |
| Metodo di collegamento | By connector |
| Funzione di override | Incorporated (12-core cable) |
| Altezza di protezione | 1,110 mm43.701 in(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
| Funzione di interblocco | Incorporated [Manual reset / auto reset (selectable by wiring)] (8-core cable or 12-core cable) |
| Altitudine operativa | 2,000 m6,561.68 ftor less(Note): Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Funzioni opzionali | Optional functions cannot be used when SF4D-□-01 is used. |
| Illuminazione ambientale | Incandescent light : 5,000 ℓx or less at the light-receiving surface |
| Temperatura ambiente | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage : -25 to +60 ℃-13 to +140 ℉ |
| Consumo attuale | Emitter : 120 mA or lessReceiver : 140 mA or less |
| Oggetto di rilevamento minimo | ø25 mmø0.984 inopaque object(Note): When the floating blanking function is used, the size of the minimum sensing object varies. For the detail, refer to the section on Safety distance. |
| Funzione di risparmio energetico | Incorporated |
| Funzione di input di prova | Incorporated |
| Numero di canali del fascio | 56 |
| Resistenza alle vibrazioni | 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions for two hours eachMalfunction resistance 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions twenty times each |
| Tempo di risposta al guasto | Within response time (OFF response) |
| Resistenza di isolamento | 20 MΩ, or more, with 500 V DC megger, between all supply terminals connected together and enclosure |
| Metodo di sincronizzazione | Line synchronization / optical synchronization (selectable by DIP switch) |
| Angolo di apertura effettivo | ±2.5° or less at a sensing range of 3 m9.843 ftor longer (based on IEC 61496-2) |
| Funzione di sblocco | Incorporated |
| T1 (intervallo di prova di prova) | 20 years |
| Norme applicabili: Giappone | JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3) |
| SFF (frazione di guasti sicuri) | 99% |
| Funzione indicatore di applicazione | Incorporated (only the receiver lights up when optical synchronization is used) |
| HFT (tolleranza ai guasti hardware) | 1 |
| Norme applicabili: Cina (GB) | GB/T 4584 |
| Conformità alla direttiva sulla marcatura CE | Machinery Directive, EMC Directive, RoHS Directive |
| Norme applicabili: Europa (UE) | EN 61496-1/2 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 55011, EN 61000-6-2, EN 50178 |
| Uscite di controllo (OSSD 1, OSSD 2) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 350 mA・Applied voltage : Same as supply voltage(between control output and +V)・Residual voltage : 2 V or less (source current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less<NPN output selected>・Maximum sink current : 350 mA・Applied voltage : Same as supply voltage(between control output and 0 V)・Residual voltage : 2 V or less (sink current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less |
| Funzione di prevenzione delle interferenze | <Not connected in series/parallel>・Line synchronization : 2 units or less (auto)・Optical synchronization : 2 units or less (selectable by DIP switch)<Connected in series/parallel>・Series connection : 5 units or less (total number of beam channels 256 or less)・Parallel connection : 3 units or less (total number of beam channels 192 or less)(Note)・Series / parallel connection mixed : 5 units or less (total number of beam channels 144 or less)(Note)(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| Norme applicabili: Nord America | ANSI/UL 61496-1/2 (Type 4),CAN/CSA C22.2 No.14, CAN/CSA E61496-1/2 |
| Funzione di monitoraggio del dispositivo esterno | Incorporated (8-core cable or 12-core cable) |
| Peso (totale dell'emettitore e del ricevitore) | 2,800g approx. |
| Uscita ausiliaria (AUX) (uscita non di sicurezza) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and +V)・Residual voltage : 2 V or less (source current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)<NPN output selected>・Maximum sink current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and 0 V)・Residual voltage : 2 V or less (sink current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state) |
| Norme applicabili: Norma internazionale | IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3) |
| Uscita di controllo (OSSD 1, OSSD 2): tempo di risposta | OFF response : 10 ms or less (Not connected in series / parallel), 18 ms or less (Connected in series / parallel)(Note 1)ON response : 50 ms or less (Note 2)(Note 3)(Note 1): For response times by number of beams, refer to the Control output (OSSD 1, OSSD 2) OFF response times.(Note 2): Because the control output (OSSD 1, OSSD 2) must be OFF for at least 80 ms, the ON response will be delayed more than 50 ms when the light blocked time is less than 30 ms.(Note 3): When optical synchronization is selected, if the beam axes of both the top end and bottom end are blocked, the ON response speed decreases by as much as 1 sec. |
| Resistenza ambientale: Grado di protezione | IP67, IP65 (IEC), NEMA Type 13 (NEMA 250) |
| Uscite di controllo (OSSD 1, OSSD 2): Modalità di funzionamento | ON when all beams are received, OFF when one or more beams are blocked(Also OFF when internal sensor error or synchronization signal error occurs)(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| Uscite di controllo (OSSD1, OSSD2): Circuito di protezione | Incorporated |
| Resistenza ambientale: tensione di rigidità dielettrica | 1,000 V AC for one minute, between all supply terminals connected together and enclosure |
| Uscita ausiliaria (AUX) (uscita non di sicurezza): tempo di risposta | OFF response : 60 ms or less, ON response : 60 ms or less |
| Uscita ausiliaria (AUX) (uscita non di sicurezza): modalità di funzionamento | Control output ON : OFF, Control output OFF : ON(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| Uscita ausiliaria (AUX) (uscita non di sicurezza): circuito di protezione | Incorporated |
| Altezza di protezione: quando utilizzato come dispositivo di sicurezza per macchine da stampa cinesi o quando utilizzato per macchine da stampa giapponesi o macchine per la tranciatura della carta | 1,100 mm43.307 in(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
Descrizione del prodotto
SF4D-H56-01_Safety Light Curtain [Type 4 PLe SIL3]_Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D_Min. sensing object ø25 mm ø0.984 in (20 mm 0.787 in beam pitch)
Caratteristiche principali
- Qualità di grado industriale
- Conforme RoHS
- Certificato CE
- Garanzia di 1 anno
Documenti del prodotto
Scheda tecnica
Specifiche tecniche e dati di prestazione
Manuale utente
Guida di installazione e utilizzo
