Orario di servizio: Lunedì a Venerdì 9:00-18:00
SF4C-F39-J05 - SF4C-F39-J05 PANASONIC Ultra-slim Safety Light Curtain Typ4 (PLe SIL3), Finger Protection, protective height..
Disponibile Prodotto più richiesto

SF4C-F39-J05

SF4C-F39-J05 PANASONIC Ultra-slim Safety Light Curtain Typ4 (PLe SIL3), Finger Protection, protective height..

$0.00USD
3499 in magazzino
Specifiche chiave
Articolo:Specifications
PFHD:3.62 × 10-9
Cavo:0.15 mm212-core heat-resistant PVC cable, 0.5 m1.640 ftlong with connector
MTTFD:100 years or more
Informazioni fornitore
PANASONIC
PANASONIC
Prodotti: 4316
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico

Specifiche tecniche

ParametroValore
ArticoloSpecifications
PFHD3.62 × 10-9
Cavo0.15 mm212-core heat-resistant PVC cable, 0.5 m1.640 ftlong with connector
MTTFD100 years or more
DettagliMin. sensing object ø14 mmø0.551 intype (10 mm0.394 inbeam pitch) [Pigtailed type]
ProdottoUltra-slim Safety Light Curtain [Type 4 PLe SIL3]
MaterialeEnclosure: Polycarbonate alloySensing surface: Polycarbonate alloy
Passo del fascio10 mm0.394 in
AccessoriMS-SFC-1 (Standard mounting bracket): 1 setSF4C-TR14 (Test rod): 1 No.
Numero di parteSF4C-F39-J05
Nome del prodottoUltra-slim Safety Light Curtain Type 4 PLe SIL3 SF4C
Funzione ELCAIncorporated (reducing mutual interference automatically)
Tensione di alimentazione24 V DC +10-15 % Ripple P-P 10 % or less
Tempo di rispostaOFF response: 9 ms or lessON response: 90 ms or less
Numero di prodottoSF4C-F39-J05
Prolunga del cavoExtension up to 40.5 m132.874 ftis possible for both emitter and receiver, with 0.2 mm2or more cable.(Note) When the muting lamp is used, the cable can be extended within 30.5 m100.066 ft(for emitter / receiver).
Funzione di disattivazione audioIncorporated
Gamma operativa0.1 to 3 m0.328 to 9.843 ft(Note) The operating range is the possible setting distance between the emitter and the receiver.
Umidità ambientale30 to 85 % RH, Storage: 30 to 85 % RH
Elemento emittenteInfrared LED (Peak emission wavelength: 855 nm0.034 mil)
Grado di inquinamento3
Resistenza agli urti300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each
Funzione di overrideIncorporated
Altezza di protezione400 mm15.748 in
Funzione di interbloccoIncorporated [Manual reset / Automatic reset (Note)](Note) The manual reset and automatic reset are possible to be switched depending on the wiring status.
Altitudine operativa2,000 m6,561 68 ftor less (Note:Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m.)
Funzioni opzionaliFixed blanking, floating blanking, auxiliary output change, safety input (safety sensor), large multi-purpose indicator setting change, interlock setting change, external relay monitoring setting change, muting setting change, override setting change, protecting(Note) In case of using optional function, the handy-controller SFC-HC is required.
Illuminazione ambientaleIncandescent light: 5,000 lx or less at the light-receiving face
Temperatura ambiente-10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -25 to +60 ℃-13 to +140 ℉
Oggetto di rilevamento minimoø14 mmø0.551 inopaque object(Note) When the floating blanking function is used, the size of the min. sensing object is changed.
Numero di canali del fascio39
Resistenza alle vibrazioni10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each
Resistenza di isolamento20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
Funzione di input di sicurezzaIncorporated (safety contact)
Angolo di apertura effettivoplus or minus 2.5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / ANSI/UL 61496-2)]
Norme applicabili: GiapponeJIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL 3)
Funzione di test/reset dell'inputIncorporated
Norme applicabili: Europa (UE)EN 61496-1 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 61508-1 to 7 (SIL 3), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate.
Uscite di controllo (OSSD 1, OSSD 2)PNP open-collector transistor / NPN open-collector transistor (switching method)[When selecting PNP output]- Max. source current: 200 mA- Applied voltage: same as supply voltage (between the control output and +V)- Residual voltage: 2.5 V or less (source current 200 mA, when using 10 m32.808 ftlength cable)- Leakage current: 200 micro A or less (including power supply OFF condition)- Max. load capacity: 1 micro F (No load to Max. output current)- Load wiring resistance: 3 Ω or less[When selecting NPN output]- Max. sink current: 200 mA- Applied voltage: same as supply voltage (between the control output and 0 V)- Residual voltage: 2.5 V or less (sink current 200 mA, when using 10 m32.808 ftlength cable)- Leakage current: 200 micro A or less (including power supply OFF condition)- Max. load capacity: 1 micro F (No load to Max. output current)- Load wiring resistance: 3 Ω or less
Norme applicabili: Nord AmericaANSI/UL 61496-1/2 (Type 4), ANSI/UL 508, UL 1998 (Class 2), CAN/CSA 61496-1/2 (Type 4), CAN/CSA C22.2 No.14,OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06(Note) With regards to the standards in the US, under the US regulation 29 CFR 1910.7, TÜV SÜD, a Nationally Recognized Testing Laboratory (NRTL) certified by OSHA, has certified with the safety certificate based on UL/ANSI standards. With regards to the standards in Canada, under the safety regulations based on CEC (Canadian Electric Code), TÜV SÜD America, a Certification Body accredited by SCC, has certified with the safety certificate based on CSA standards.
Funzione di monitoraggio del dispositivo esternoIncorporated
Uscita ausiliaria (uscita non di sicurezza)PNP open-collector transistor / NPN open-collector transistor (switching method)[When selecting PNP output]- Max. source current: 100 mA- Applied voltage: same as supply voltage (between the auxiliary output and +V)- Residual voltage: 2.5 V or less (source current 100 mA, when using 10 m32.808 ftlength cable)[When selecting NPN output]- Max. sink current: 100 mA- Applied voltage: same as supply voltage (between the auxiliary output and 0 V)- Residual voltage: 2.5 V or less (sink current 100 mA, when using 10 m32.808 ftlength cable)
Peso netto (totale di emettitore e ricevitore)400 g approx.
Norme applicabili: Norma internazionaleIEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL 3)
Resistenza ambientale: Grado di protezioneIP67 / IP65 (IEC)
Uscite di controllo (OSSD 1, OSSD 2): Modalità di funzionamentoON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the Safety Light Curtain or the synchronization signal)(Note) The outputs are not ''OFF'' when muting function is active even if the beam channel is interruped.(Note) In case the blanking function is valid, the operation mode is changed.
Uscite di controllo (OSSD1, OSSD2): Circuito di protezioneIncorporated
Uscita ausiliaria (uscita non di sicurezza): modalità di funzionamentoOFF when control outputs are ON, ON when control outputs are OFF (Factory setting, operating mode can be changed using the SFC-HC handy-controller).
Resistenza ambientale: tensione di rigidità dielettrica1,000 V AC for one min. between all supply terminals connected together and enclosure
Uscita ausiliaria (uscita non di sicurezza): circuito di protezioneIncorporated
Consumo di corrente: grande indicatore multifunzione si illuminaEmitter: 115 mA or lessReceiver: 120 mA or less
Consumo di corrente: Grandi spie luminose multifunzione spenteEmitter: 80 mA or lessReceiver: 90 mA or less

Descrizione del prodotto

More details
Caratteristiche principali
  • Qualità di grado industriale
  • Conforme RoHS
  • Certificato CE
  • Garanzia di 1 anno

Documenti del prodotto

Scheda tecnica

Specifiche tecniche e dati di prestazione

Manuale utente

Guida di installazione e utilizzo

Top