


| Parametro | Valore |
|---|---|
| Articolo | Specifications |
| PFHD | 4.12 × 10-9(Note) Probability of dangerous failure per hour. |
| Cavo | 0.16 mm25-core heat-resistant PVC cable, 3 m 9.842 ft long |
| MTTFD | 100 years or more(Note) Mean time to dangerous failure. |
| Dettagli | Hand protection type Min. sensing object ø25 mmø0.984 in(20 mm0.787 inbeam pitch) |
| Prodotto | Ultra-slim Light Curtain [Type 2 PLc SIL1] |
| Materiale | Enclosure: Polycarbonate alloySensing surface: Polycarbonate alloyMS-SFC-1 (Standard mounting bracket): Stainless steel (SUS) |
| Passo del fascio | 20 mm0.787 in |
| Accessori | MS-SFC-1 (Standard mounting bracket): 1 setSF4C-TR25 (Test rod): 1 No. |
| Numero di parte | SF2C-H32-N |
| Nome del prodotto | Ultra-slim Light Curtain [Type2 PLc SIL1] SF2C |
| Tensione di alimentazione | 24 V DC plus or minus 20 % Ripple P-P 10 % or less |
| Tempo di risposta | OFF response: 20 ms or lessON response: 80 to 100 ms |
| Numero di prodotto | SF2C-H32-N |
| Prolunga del cavo | Extension up to total 50m is possible for 0.3mm2or more, cable |
| Gamma operativa | 0.1 to 3 m0.328 to 9.843 ft |
| Umidità ambientale | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Elemento emittente | Infrared LED (Peak emission wavelength: 850 nm0.034 mil) |
| Grado di inquinamento | 3 |
| Resistenza agli urti | 300 m / s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Altezza di protezione | 640 mm25.197 in |
| Altitudine operativa | 2, 000 m6561.680 ftor less(Note) Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Illuminazione ambientale | Incandescent light: 5,000 ℓx or less at the light-receiving face |
| Temperatura ambiente | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: - 25 to +60 ℃- 13 to +140 ℉ |
| Uscita di blocco (SSD) | - Maximum sink current: 60mA- Applied voltage: same as supply voltage (between the lockout output and -0V)- Residual voltage: 2.5V or less (sink current 60mA, when using 10m length cable)- Leakage current: 200micro A or less (power supply OFF condition)- Maximum load capacity: 2.2micro F (No load to maximum output current)- Load wiring resistance: 3Ω or less |
| Oggetto di rilevamento minimo | ø25 mmø0.984 inopaque object |
| Funzione di input di prova | Incorporated |
| Uscita di controllo (OSSD) | - Maximum sink current: 200mA- Applied voltage: same as supply voltage (between the control output and -0V)- Residual voltage: 2.5V or less (sink current 200mA, when using 10m length cable)- Leakage current: 200micro A or less (power supply OFF condition)- Maximum load capacity: 2.2micro F (No load to maximum output current)- Load wiring resistance: 3Ω or less |
| Numero di canali del fascio | 32 |
| Resistenza alle vibrazioni | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Resistenza di isolamento | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Angolo di apertura effettivo | plus or minus 5℃ or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / ANSI/UL 61496-2) ] |
| Norme applicabili: Giappone | JIS B 9704-1 / 2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508 (SIL 1) |
| Conformità alla direttiva sulla marcatura CE | Machinery Directive, EMC Directive, RoHS Directive |
| Norme applicabili: Europa (UE) | EN 61496-1 (Type 2), EN ISO 13849-1 (Category 2, PLc), EN 61508-1 to 7 (SIL 1), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TUV SUD, has certified with the type examination certificate. |
| Funzione di prevenzione delle interferenze | Incorporated |
| Norme applicabili: Nord America | ANSI / UL 61496-1 / 2 (Type 2), ANSI / UL 508, CAN / CSA 61496-1 / 2 (Type 2), CAN / CSA C22.2 No.14, ANSI / RIA 15.06(Note) With regard to the standards in US / Canada, TUV SUD, has certified for cTUVus Mark. |
| Uscita di blocco (SSD): modalità operativa | ON during normal operation, OFF during lockout(Note) If the emitter enters a lockout state, and light from the emitter enters the receiver, lockout information will be transmitted and lockout output (SSD) will turn OFF. |
| Uscita di controllo (OSSD): modalità operativa | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal) |
| Grande funzione di indicatore multiuso | Incorporated |
| Uscita di blocco (SSD): circuito di protezione | Incorporated |
| Uscita di controllo (OSSD): circuito di protezione | Incorporated |
| Peso netto (totale di emettitore e ricevitore) | 640 g approx. |
| Norme applicabili: Norma internazionale | IEC 61496-1 / 2 (Type 2), ISO 13849-1 (Category 2, PLc), IEC 61508-1 to 7 (SIL 1) |
| Resistenza ambientale: Grado di protezione | IP65, IP67 (IEC) |
| Consumo di corrente: grande indicatore multifunzione si illumina | Emitter: 50 mA or lessReceiver: 45 mA or less |
| Consumo di corrente: Grandi spie luminose multifunzione spente | Emitter: 35 mA or lessReceiver: 35 mA or less |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo