SCW12A-15

12W DC-DC Regulated Single Output Converter SCW12series 12W DC-DC Regulated Single Output Converter SCW12series12W DC-DC Regulated Single Output Converter SCW12series SPECIFICATION SPECIFICATIONSPECIFICATION ORDER NO. ORDER NO.ORDER NO. Features : Features :Features : 2:1 wide input range 2:1 wide input range2:1 wide input range 1500VDC l/O isolation 1500VDC l/O isolation1500VDC l/O isolation Built-in remote ON/OFF control Built-in remote ON/OFF controlBuilt-in remote ON/OFF control Built-in EMl filter Built-in EMl filterBuilt-in EMl filter Protections: short circuit / Overload Protections: short circuit / OverloadProtections: short circuit / Overload Cooling by free air convection Cooling by free air convectionCooling by free air convection Five-sided shield metal Five-sided shield metalFive-sided shield metal 100% full load burn-in test 100% full load burn-in test100% full load burn-in test Low cost / High reliability Low cost / High reliabilityLow cost / High reliability Modified models available: output 2.5 V/3.3 V Modified models available: output 2.5 V/3.3 VModified models available: output 2.5 V/3.3 V 2 years warranty 2 years warranty2 years warranty SCW12A-05 SCW12B-05 SCW12C-05 SCW12A-12 SCW12B-12 SCW12C-12 SCW12A-15 SCW12B-15 SCW12C-15 SCW12A-05 SCW12B-05 SCW12C-05 SCW12A-12 SCW12B-12 SCW12C-12 SCW12A-15 SCW12B-15 SCW12C-15SCW12A-05 SCW12B-05 SCW12C-05 SCW12A-12 SCW12B-12 SCW12C-12 SCW12A-15 SCW12B-15 SCW12C-15 DC VOLTAGE5V DC VOLTAGE5VDC VOLTAGE5V 12V15V 12V15V12V15V CURRENT RANGE CURRENT RANGECURRENT RANGE RATED POWER RATED POWERRATED POWER 480 ~ 2400mA 200 ~ 1000mA 160 ~ 800mA 480 ~ 2400mA 200 ~ 1000mA 160 ~ 800mA480 ~ 2400mA 200 ~ 1000mA 160 ~ 800mA 12W 12W12WOUTPUT OUTPUTOUTPUT RIPPLE & NOISE (max.) Note.250mVp-p60mVp-p60mVp-p RIPPLE & NOISE (max.) Note.250mVp-p60mVp-p60mVp-pRIPPLE & NOISE (max.) Note.250mVp-p60mVp-p60mVp-p LINE REGULATIONNote.30.5% LINE REGULATIONNote.30.5%LINE REGULATIONNote.30.5% LOAD REGULATIONNote.40.5% LOAD REGULATIONNote.40.5%LOAD REGULATIONNote.40.5% VOLTAGE ACCURACY SWITCHING FREQUENCY VOLTAGE ACCURACY SWITCHING FREQUENCYVOLTAGE ACCURACY SWITCHING FREQUENCY 2.0% 2.0%2.0% 400KHzmin. 400KHzmin.400KHzmin. EXTERNAL CAPACITANCE LOAD (max.) 1000uF220uF220uF EXTERNAL CAPACITANCE LOAD (max.) 1000uF220uF220uFEXTERNAL CAPACITANCE LOAD (max.) 1000uF220uF220uF VOLTAGE RANGE EFFICIENCY (Typ.) VOLTAGE RANGE EFFICIENCY (Typ.)VOLTAGE RANGE EFFICIENCY (Typ.) A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDCA: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC 82% 83% 84% 82% 83% 83% 82% 85% 83% 82% 83% 84% 82% 83% 83% 82% 85% 83%82% 83% 84% 82% 83% 83% 82% 85% 83%INPUT INPUTINPUT DC CURRENT FILTER DC CURRENT FILTERDC CURRENT FILTER Full load Full loadFull load Does not load Does not loadDoes not load Pinetwork PinetworkPinetwork R: 1245mA B: 625mAC: 320mA A: 70mA B: 35mAC: 25mA R: 1245mA B: 625mAC: 320mA A: 70mA B: 35mAC: 25mAR: 1245mA B: 625mAC: 320mA A: 70mA B: 35mAC: 25mA Fuse PROTECTION recommended Fuse PROTECTION recommendedFuse PROTECTION recommended 110 ~ 180%rated output power 110 ~ 180%rated output power110 ~ 180%rated output powerPROTECTION PROTECTIONPROTECTION (Note. 5) (Note. 5)(Note. 5) ENVIRONMENT ENVIRONMENTENVIRONMENTSAFETY SECURITYSECURITY OTHER OTHEROTHER The OVERHEAD of The OVERHEAD ofOVERLOADSHORT CIRCUIT WORKING TEMP. SHORT CIRCUIT WORKING TEMP.SHORT CIRCUIT WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATIONOPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION RESISTANCE TO STRESS RESISTANCE TO STRESSRESISTANCE TO STRESS ISOLATION RESISTANCE ISOLATION CAPACITANCE EMC EMISSION ISOLATION RESISTANCE ISOLATION CAPACITANCE EMC EMISSIONISOLATION RESISTANCE ISOLATION CAPACITANCE EMC EMISSION EMC IMMUNITY EMC IMMUNITYEMC IMMUNITY REMOTE CONTROL MTBF REMOTE CONTROL MTBFREMOTE CONTROL MTBF DIMENSION DIMENSIONDIMENSION WEIGHT WEIGHTWEIGHT Protection type :Hiccup mode, recovers automatically after fault condition is removed Protection type :Hiccup mode, recovers automatically after fault condition is removedProtection type :Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit All output equipped with short circuitAll output equipped with short circuit Protection type :Hiccup mode, recovers automatically after fault condition is removed Protection type :Hiccup mode, recovers automatically after fault condition is removedProtection type :Hiccup mode, recovers automatically after fault condition is removed -40 ~ +71 (Refer to "Reduction Curve") -40 ~ +71 (Refer to "Reduction Curve")-40 ~ +71 (Refer to "Reduction Curve") 20% ~ 90%RHnon-condensing 20% ~ 90%RHnon-condensing20% ~ 90%RHnon-condensing -40 ~ +105, 10 ~ 95% RH -40 ~ +105, 10 ~ 95% RH-40 ~ +105, 10 ~ 95% RH 0.05% /(0 ~ 50) 0.05% /(0 ~ 50)0.05% /(0 ~ 50) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60 min. eachalongX, y, Z axes 10 ~ 500Hz, 2G 10min./1 cycle, period for 60 min. eachalongX, y, Z axes10 ~ 500Hz, 2G 10min./1 cycle, period for 60 min. eachalongX, y, Z axes I/P-O/P:1.5 KVDC I/P-O/P:1.5 KVDCI/P-O/P:1.5 KVDC I/P-O/P: 100M Ohms / 500VDC / 25/ 70% RH I/P-O/P: 100M Ohms / 500VDC / 25/ 70% RHI/P-O/P: 100M Ohms / 500VDC / 25/ 70% RH 2200pFmax. 2200pFmax.2200pFmax. Compliance to EN55022 Class a, FCC part 15 Class a Compliance to EN55022 Class a, FCC part 15 Class aCompliance to EN55022 Class a, FCC part 15 Class a Compliance to EN61000-4-2,3,4,5,6,8 light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8 light industry level,criteria ACompliance to EN61000-4-2,3,4,5,6,8 light industry level,criteria A POWER: reinforced concrete ~ - Vin > 4v dc or open ; OFF: reinforced concrete ~ -Vin < 1vdc or short POWER: reinforced concrete ~ - Vin > 4v dc or open ; OFF: reinforced concrete ~ -Vin < 1vdc or shortPOWER: reinforced concrete ~ - Vin > 4v dc or open ; OFF: reinforced concrete ~ -Vin < 1vdc or short 600Khrs min.MIL-HDBK-217F(25) 600Khrs min.MIL-HDBK-217F(25)600Khrs min.MIL-HDBK-217F(25) 31.8*20.3*12.2 mm or 1.25"*0.80"*0.48 " (L*W*H) 31.8*20.3*12.2 mm or 1.25"*0.80"*0.48 " (L*W*H)31.8*20.3*12.2 mm or 1.25"*0.80"*0.48 " (L*W*H) 18.5 g 18.5 g18.5 gMechanical Specification Mechanical SpecificationMechanical Specification Unit:mm(in.) Unit:mm(in.)Unit:mm(in.) Pin Configuration Of The Curve Of Reduction Of Power Pin Configuration Of The Curve Of Reduction Of PowerPin Configuration Of The Curve Of Reduction Of Power 20.3(0.80) 20.3(0.80)20.3(0.80) 0.6 + 0.2/-0 0.6 + 0.2/-00.6 + 0.2/-0 2.54(0.10) 2.54(0.10)2.54(0.10) 3.81(0.15) 3.81(0.15)3.81(0.15) P i n n or . Output P i n n or . OutputP i n n or . Output 100 100One hundred 1 1One 23 2 23 223 2 22 3 22 322 3BOTTOMVIEW BOTTOMVIEWBOTTOMVIEW169 169One million six hundred ninety one thousand four hundred eleven 1411141115.24(0.60) 15.24(0.60)15.24(0.60)2.54(0.10) 2.54(0.10)2.54(0.10) 5.08(0.20) 5.08(0.20)5.08(0.20) SIDE VIEW SIDE VIEWSIDE VIEW 12.2(0.48) 12.2(0.48)12.2(0.48) 1 1One 2 & 3 2 & 32 & 3 9 9Nine 11 11Eleven 14 14Fourteen 16 16Sixteen 2 2 and 2 3 2 2 and 2 32 2 and 2 3 Reinforced concrete Reinforced concreteReinforced concrete -V-in N. C. N. C. -V-in N. C. N. C.-V-in N. C. N. C. +V +V+V -V -V-V +V i n +V i n+V i n 60 60Sixty -40 0 2550 6071 -40 0 2550 6071-40 0 2550 6071Ta () Ta ()Ta ()100 100100NOTE NOTENOTE 1.All parameters are specified at normal input, ratedload, from 25 to 70% relative humidity environment. 1.All parameters are specified at normal input, ratedload, from 25 to 70% relative humidity environment.1.All parameters are specified at normal input, ratedload, from 25 to 70% relative humidity environment. 2.Curly and noiseare measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 2.Curly and noiseare measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.2.Curly and noiseare measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 3.Line regulation is measured from low line to high line at ratedload. 3.Line regulation is measured from low line to high line at ratedload.3.Line regulation is measured from low line to high line at ratedload. 4.Loadregulation is measured from 20% to 100% ratedload. 4.Loadregulation is measured from 20% to 100% ratedload.4.Loadregulation is measured from 20% to 100% ratedload. 5.Please prevent the converter from operating in overload or short circuit conditionfor more than30 seconds. 5.Please prevent the converter from operating in overload or short circuit conditionfor more than30 seconds.5.Please prevent the converter from operating in overload or short circuit conditionfor more than30 seconds.File name:SCW12-SPEC 2014-08-13 File name:SCW12-SPEC 2014-08-13File name:SCW12-SPEC 2014-08-13