PD30CNP06NPDU

PhotoelectricsRetro-reflective, PolarizedType PD30CNP06....DU• Miniature sensor range• Range: 6 m, with reflector• Sensitivity adjustment by Teach-In programming• Modulated, red light 660 nm, polarized• Supply voltage: 10 to 30 VDC• Output: 100 mA, NPN or PNP preset• Make and break switching function programmable• LED indication for output, stability and power ON• Protection: reverse polarity, short circuit and transients• Cable and plug versions• Excellent EMC performance• Dust alarm outputProduct DescriptionOrdering KeyPD30CNP06PPM5DUThe PD30CNP06 sensor fam- ily comes in a compact 10 x30 x 20 mm reinforcedPMMA/ABS housing.Thesensorsareusefulin applications wherehigh- accuracy detection as well as small size is required. Compacthousingandhigh power LED for excellent per- formance-size ratio.The Teach-In function for adjustmentof the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is one programmable (NO or NC) and one dust output NO or NC.TypeHousing style Housing size Housing material Housing length Detection principle Sensing distance Output typeOutput configurationConnection typeDust outputType SelectionHousingRangeConnection Ordering no. Ordering no. W x H x DSn NPN PNPMake or break switchingMake or break switching10 x 30 x 20 mm 6 m Cable PD 30 CNP 06 NPDU PD 30 CNP 06 PPDU10 x 30 x 20 mm 6 m Plug PD 30 CNP 06 NPM5DUPD 30 CNP 06 PPM5DUNote: Reflectors to be ordered seperatelySpecificationsRated operating distance (Sn)Up to 6 m, with reflectorØ 80 mm (ER4)4 m on ER4060 reflectorBlind zone 100 mmSensitivity Adjustable by Teach-InTemperature drift ≤ 0.1%/ºCHysteresis (H)(differential travel) ≤ 10%Rated operational volt. (UB )10 to 30 VDC (ripple included)Ripple (Urpp ) ≤ 10%Output currentContinuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA(max. load capacity 100 nF)Dust output currentContinuous (Ie) ≤ 20 mA Short-time (I) ≤ 20 mA(max. load capacity 100 nF)No load supply current (Io)≤ 30 mA @ 24 VDCMinimum operational current (Im) 0.5 mAOFF-state current (Ir )≤ 100 µAVoltage drop (Ud ) ≤ 2.4 VDC @ 100 mAProtection Short-circuit, reverse polarity and transientsLight source GaAlAs, LED, 660 nm Light typeRed, modulated Sensing angle ± 2ºAmbient light10,000 luxLight spot110 mm @ 1.5 mOperating frequency1000 HzResponse timeOFF-ON (tON)≤ 0.5 msON-OFF (tOFF ) ≤ 0.5 msPower ON delay (tv) ≤ 300 msOutput functionNPN and PNPPresetNO/NC switching function Set up by buttonOutput configurationProgramming optionsOutput pin 4 black NO or NC OutputNO or NC (dust)Dust alarm outputDelay on operate 20 msIndicationOutput ON LED, yellowSignal stability ON and power ON LED, greenSpecifications are subject to change without notice (09.12.2008) 1