


| Parametro | Valore |
|---|---|
| Nome della funzionalità | Feature Value |
| Profondità (EF000049) | None mm |
| Larghezza (EF000008) | None mm |
| Colore (EF000007) | |
| Altezza (EF000040) | None mm |
| Vantaggio: (Caratteristiche) | A flexible solution that allows customers to create enclosure configurations made up of smaller individual enclosures. The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree. |
| Commento: (Caratteristiche) | Stainless steel side panels, SPMS, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved. |
| Caratteristica: (Caratteristiche) | Stainless steel 304 and 316(L) double door combinable floor standing enclosures, with a IP 55 protection degree. |
| Materiale (EF002169) | |
| Accoppiabile (EF001229) | |
| Numero RAL (EF000116) | |
| Porta: (Dati tecnici) | Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking. |
| Versione EMC (EF001062) | |
| Serratura: (Dati tecnici) | Espagnolette 4-point locking system in the main door and 2-point locking system in the slave door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handle are available as accessories. |
| Modello angolare (EF020814) | |
| Telaio: (Dati tecnici) | Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660. |
| Autoportante (EF020363) | |
| Tetto a falde (EF009278) | |
| Finitura: (Dati tecnici) | 400 pre-grained stainless steel. |
| Fissaggio a palo (EF009582) | |
| Con porta posteriore (EF007381) | |
| Consegna: (Dati tecnici) | Frame with fitted doors, rear panel, roof panel, bottom plates, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow baying without removal. Packing material is recyclable. |
| Messa a terra: (Dati tecnici) | All panels are earthed through their fittings and are equipped with a separate earthing stud. |
| Resistenza all'impatto (EF004293) | |
| Materiale: (Dati tecnici) | AISI 304L pre-grained stainless steel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel. |
| Numero di porte (EF000122) | |
| Numero di blocchi (EF000123) | |
| Qualità del materiale (EF001257) | |
| Con porta vetrata (EF001089) | |
| Protezione: (Dati tecnici) | Complies with IP 55 TYPE 12, 13 IK 10. |
| Pannello posteriore: (Dati tecnici) | Fitted by M6 torx screws. Standard facilities for rear door mounting. Split rear panels in 1600 mm wide enclosures. |
| Pannello del tetto: (Dati tecnici) | Removable. |
| Finitura superficiale (EF006569) | |
| Pannelli laterali: (Dati tecnici) | Supplied as an accessory. |
| Con piastra di montaggio (EF000118) | |
| Piastre inferiori: (Dati tecnici) | Two piece bottom plate in 1200 mm width, with injected polyurethane gasket to ensure maximum sealing. |
| Montaggio intermedio (EF022994) | |
| Piastra di montaggio: (Dati tecnici) | Double folded and adjustable in depth by steps of 25 mm, with the MPD02 accessory. Mounting plate is delivered, attached on the outside of the enclosure packaging. |
| Con porta di ventilazione (EF006279) | |
| Grado di protezione (IP) (EF005474) | |
| Modello da parete con appoggio a terra (EF015208) | |
| Adatto per incasso a parete (EF007536) | |
| Adatto per il montaggio a parete (EF000664) | |
| Grado di protezione (NEMA) (EF011959) | |
| Requisiti di montaggio: (Dati tecnici) | Standard delivery ready for combined installation. For stand-alone installation, add side panels. |
| Adatto per montaggio metrico (EF005823) | |
| Piastra di montaggio regolabile in profondità (EF006054) | |
| Carico massimo ammissibile della/e porta/e secondo IEC 62208 (EF014988) | None N |
| Carico massimo ammissibile dell'involucro secondo IEC 62208 (EF014987) | None N |
| Dissipazione termica (Delta T = 20 K) secondo IEC/TR 60890 (EF014986) | None W |
| Carico massimo ammissibile della piastra di montaggio secondo IEC 62208 (EF014989) | None N |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo