Orario di servizio: Lunedì a Venerdì 9:00-18:00
LCM-25DA - LCM-25DA MEANWELL AC-DC Multi-Stage Output LED driver Active PFC, Output 0.35A/0.6A/0.7A/0.9A/1.05A, DALI an..
Disponibile Prodotto più richiesto

LCM-25DA

LCM-25DA MEANWELL AC-DC Multi-Stage Output LED driver Active PFC, Output 0.35A/0.6A/0.7A/0.9A/1.05A, DALI an..

$0.00USD
3662 in magazzino
Specifiche chiave
Nome:LCM-25DA
Energia:18,9 W
Stato:Recommended Model
Azione:Yes
Informazioni fornitore
MEANWELL
MEANWELL
Prodotti: 6448
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico

Specifiche tecniche

ParametroValore
NomeLCM-25DA
Energia18,9 W
StatoRecommended Model
AzioneYes
FormatoBox
SerieLCM-25DA
OscuramentoDALI, Push-button
ApprovazioniCCC, CE, ENEC, UL
Potenza (W)25,20
SottoformatoIP20
Larghezza (mm)68.00
Altezza (mm)23.00
Ingresso CA Max277,00
Ingresso CA Min180,00
ApplicazioniLighting
ProduttoreMEAN WELL
Tipo di prodottoLED Driver
Isolamento (V)3.750,00
Corrente di uscita350mA
Potenza di picco (W)25.2
Connettore di ingressoQuick Connector
Frequenza di ingresso50 Hz, 60 Hz
Lungo/Sfondo105.00
Descrizione lungaLED driver dimmable..Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP20.Input range180-277Vca47-63Hz.Current output selectable by micro-switch350, 500, 600, 700, 900 or 1050mA.Output current350mA500mA600mA700mA900mA1050mAPower18,9 W25,2 W25,2 W25,2 W25,2 W25,2 WRange of Output Voltage6-54Vcc6-50Vcc6-42Vcc6-36Vcc6-28Vcc6-24vdcEfficiency typical:86%.Regulation DALI0% to 100% of the intensity of output or push-button (PUSH-DALI). Certificate to DALI.We can regulate by push-button by connecting the input line cord to a push-button normally open and then to the Push (up-regulation in primary). You can connect any number of drivers LCM-GIVES the same push-button.Synchronization: we can sync up10 unitsvia the wires LCM-xxx-SYNC25 in such a way that by regulating a source other do the same regulation without the need to be connected to the bus DALI or push-button. We also make sure that if we use dimming by push button fonts are not desincronizarán.Input class II without grounding.Factor corrector, power>0.94to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-30ºCup+60ºC.Dimensions (Length x Width x Height):105 x 68 x 23mm.3 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.Be sure to adjust the output current desired using the selector current. For more information please see the datasheet in the section attachments.With plastic housing, designed for applications of LED lighting and architectural. Suitable for indoor lighting, offices, LED panels.Low ripple current, no flicker (flicker-free).Compatible with any system DALI.
Connettore di uscitaQuick Connector
Tipo di ingresso CASingle-phase
Garanzia (anni)3,00
Paese di origineChina
Corrente di uscita mA350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050
Gamma di tensione di uscita6-54Vcc
Intensità di uscita minima (mA)350,00
Intensità di uscita massima (mA)1.050,00

Descrizione del prodotto

More details
Caratteristiche principali
  • Qualità di grado industriale
  • Conforme RoHS
  • Certificato CE
  • Garanzia di 1 anno

Dettagli tecnici

LED driver dimmable..

Documenti del prodotto

Scheda tecnica

Specifiche tecniche e dati di prestazione

Manuale utente

Guida di installazione e utilizzo

Top