Orario di servizio: Lunedì a Venerdì 9:00-18:00
HVGC-320-2100B - HVGC-320-2100B MEANWELL AC-DC Single Output LED driver Constant Current (CC) with built-in PFC, Output 156VD..
Disponibile Prodotto più richiesto

HVGC-320-2100B

HVGC-320-2100B MEANWELL AC-DC Single Output LED driver Constant Current (CC) with built-in PFC, Output 156VD..

$0.00USD
4285 in magazzino
Specifiche chiave
Nome (dettagli):HVGC-320-2100B
Stato (dettagli):Recommended Model
Formato (dettagli):Box
Serie (dettagli):HVGC-320-B
Informazioni fornitore
MEANWELL
MEANWELL
Prodotti: 6448
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico

Specifiche tecniche

ParametroValore
Nome (dettagli)HVGC-320-2100B
Stato (dettagli)Recommended Model
Formato (dettagli)Box
Serie (dettagli)HVGC-320-B
Approvazioni (dettagli)EC, EAC, ENEC, MM, UL
Potenza (W) (Dettagli)320,00
Regolamento (dettagli)0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V
Subformato (Dettagli)IP67
Larghezza (mm) (Dettagli)90.00
Altezza (mm) (Dettagli)43.80
Ingresso CA Max (Dettagli)528,00
Ingresso CA Min (Dettagli)180,00
Applicazioni (dettagli)Lighting
Produttore (dettagli)MEAN WELL
Tipo di prodotto (dettagli)LED Driver
Isolamento (V) (Dettagli)3.750,00
Potenza di picco (W) (Dettagli)Three hundred twenty
Connettore di ingresso (dettagli)Cable
Frequenza di ingresso (dettagli)50 Hz, 60 Hz
Lungo/Sfondo (Dettagli)262.00
Descrizione lunga (dettagli)LED driver dimmable with phase input.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP67.Input range180-528Vca47-63Hz.Output in constant current2,1 A.Range of output voltage with current mode constant76,2 to 152,4 v Dcaccording to demand load.Power:320W.Efficiency typical:93,5%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class I with grounding.Factor corrector, power>0,98to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+90ºC.Dimensions (Length x Width x Height):262 x 90 x 43.8 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.The series HVG are LED drivers, class I grounded.With metal housing IP67. The series HVG has a high efficiency designed for applications of public lighting, exterior, interior, or any application of LED lighting. Approved HL Class I Division 2 for ex-zones in the US. Complies with the requirements of security at the global level for lighting.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver.Compatible with any dimmer 1-10V-market both assets and liabilities. Does not work with dimmers Triac dimmer cutting phase.Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open)SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver.
Connettore di uscita (dettagli)Cable
Tipo di ingresso CA (dettagli)Three-phase
Garanzia (anni) (dettagli)5,00
Paese di origine (dettagli)China
Corrente di uscita mA (Dettagli)Two thousand one hundred
Intensità di uscita minima (mA) (dettagli)2.100,00
Intensità di uscita massima (mA) (dettagli)2.100,00

Descrizione del prodotto

More details
Caratteristiche principali
  • Qualità di grado industriale
  • Conforme RoHS
  • Certificato CE
  • Garanzia di 1 anno

Dettagli tecnici

LED driver dimmable with phase input.

Documenti del prodotto

Scheda tecnica

Specifiche tecniche e dati di prestazione

Manuale utente

Guida di installazione e utilizzo

Top