HRP-600-3.3

600W Single Output with the Function of PFC 600W Single Output with the Function of PFC600W Single Output with the Function of PFC HRP-600series HRP-600seriesHRP-600series SPECIFICATION SPECIFICATIONSPECIFICATION MODEL MODELMODEL DC VOLTAGE RATED CURRENT RANGE RATED POWER DC VOLTAGE RATED CURRENT RANGE RATED POWERDC VOLTAGE RATED CURRENT RANGE RATED POWER Features : Features :Features : Universal AC input / Full range Universal AC input / Full rangeUniversal AC input / Full range Built-in active PFC function,PF>0.94 Built-in active PFC function,PF>0.94Built-in active PFC function,PF>0.94 High efficiencyup 89% High efficiencyup 89%High efficiencyup 89% Withstand 300VAC surge input for 5 seconds Withstand 300VAC surge input for 5 secondsWithstand 300VAC surge input for 5 seconds Protections: short circuit / Overload / Over voltage / Over temperature Protections: short circuit / Overload / Over voltage / Over temperatureProtections: short circuit / Overload / Over voltage / Over temperature Built-in limiting circuit of constant current Built-in limiting circuit of constant currentBuilt-in limiting circuit of constant current Built-in cooling fan ON-OFF control Built-in cooling fan ON-OFF controlBuilt-in cooling fan ON-OFF control Built-in DC OK signal Built-in DC OK signalBuilt-in DC OK signal Built-in remote sense function Built-in remote sense functionBuilt-in remote sense function All using 105 long life electrolytic capacitors All using 105 long life electrolytic capacitorsAll using 105 long life electrolytic capacitors 5 years warranty 5 years warranty5 years warranty HRP-600-3.3 HRP-600-5HRP-600-7.5 HRP-600-12HRP-600-15HRP-600-24HRP-600-36HRP-600-48 HRP-600-3.3 HRP-600-5HRP-600-7.5 HRP-600-12HRP-600-15HRP-600-24HRP-600-36HRP-600-48HRP-600-3.3 HRP-600-5HRP-600-7.5 HRP-600-12HRP-600-15HRP-600-24HRP-600-36HRP-600-48 3.3 V 5V 7.5 V 12V15V24V36V48V 3.3 V 5V 7.5 V 12V15V24V36V48V3.3 V 5V 7.5 V 12V15V24V36V48V 120A 120A80A53A43A27A17.5A 13A 120A 120A80A53A43A27A17.5A 13A120A 120A80A53A43A27A17.5A 13A 0 ~ 120A0 ~ 120A0 ~ 80A0 ~ 53A0 ~ 43A0 ~ 27A0 ~ 17.5 0 ~ 13A 0 ~ 120A0 ~ 120A0 ~ 80A0 ~ 53A0 ~ 43A0 ~ 27A0 ~ 17.5 0 ~ 13A0 ~ 120A0 ~ 120A0 ~ 80A0 ~ 53A0 ~ 43A0 ~ 27A0 ~ 17.5 0 ~ 13A 396W 600W 600W 636W 645W 648W 630W 624W 396W 600W 600W 636W 645W 648W 630W 624W396W 600W 600W 636W 645W 648W 630W 624W RIPPLE & NOISE (max.) Note.2100mVp-p100mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p RIPPLE & NOISE (max.) Note.2100mVp-p100mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-pRIPPLE & NOISE (max.) Note.2100mVp-p100mVp-p100mVp-p120mVp-p150mVp-p150mVp-p200mVp-p240mVp-p OUTPUT VOLTAGE ADJ. RANGE of OUTPUT VOLTAGE ADJ. RANGE ofOUTPUT VOLTAGE ADJ. RANGE of 2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V 2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V VOLTAGE TOLERANCE Note.32.0%2.0%2.0%1.0%1.0%1.0%1.0%1.0% VOLTAGE TOLERANCE Note.32.0%2.0%2.0%1.0%1.0%1.0%1.0%1.0%VOLTAGE TOLERANCE Note.32.0%2.0%2.0%1.0%1.0%1.0%1.0%1.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) 0.5%0.5%0.5%0.3%0.3%0.2%0.2%0.2% 0.5%0.5%0.5%0.3%0.3%0.2%0.2%0.2%0.5%0.5%0.5%0.3%0.3%0.2%0.2%0.2% 1.0%1.0%1.0%0.5%0.5%0.5%0.5%0.5% 1.0%1.0%1.0%0.5%0.5%0.5%0.5%0.5%1.0%1.0%1.0%0.5%0.5%0.5%0.5%0.5% 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load16ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDCVOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz PF>0.94/230VAC PF>0.99/115VAC at full load PF>0.94/230VAC PF>0.99/115VAC at full loadPF>0.94/230VAC PF>0.99/115VAC at full load INPUT INPUTINPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENTEFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD ofThe OVERHEAD of 78.5% 82% 78.5% 82%78.5% 82% 7.6 A/115VAC3.6A/230VAC 7.6 A/115VAC3.6A/230VAC7.6 A/115VAC3.6A/230VAC 35A/115VAC70A/230VAC 35A/115VAC70A/230VAC35A/115VAC70A/230VAC <1.2 mA / 240VAC <1.2 mA / 240VAC<1.2 mA / 240VAC 105 ~ 135% rated output power 105 ~ 135% rated output power105 ~ 135% rated output power 87%88%88%88%89%89% 87%88%88%88%89%89%87%88%88%88%89%89% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removedProtection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION PROTECTIONPROTECTIONOVER VOLTAGE OVER VOLTAGEOVER VOLTAGE 3.96 ~ V 4.62 3.96 ~ V 4.623.96 ~ V 4.62 6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V 6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 VFUNCTION The FUNCTIONFUNCTIONENVIRONMENT ENVIRONMENTENVIRONMENT SAFETY AND EMC SAFETY AND EMCSAFETY AND EMC (Note 4) (Note 4)(Note 4)OTHER OTHEROTHERSOVER TEMPERATURE DC OK SIGNAL OVER TEMPERATURE DC OK SIGNALOVER TEMPERATURE DC OK SIGNAL FAN CONTROL (Typ.) WORKING TEMP. WORKING HUMIDITY FAN CONTROL (Typ.) WORKING TEMP. WORKING HUMIDITYFAN CONTROL (Typ.) WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., The MOISTURE STORAGE TEMP., The MOISTURESTORAGE TEMP., The MOISTURE TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATIONTEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSIONSAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGINGPACKAGING Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recoverProtection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down Shut down o/p voltage, recovers automatically after temperature goes downShut down o/p voltage, recovers automatically after temperature goes down The psu turns on : 3.3 ~ 5.6 V psu turn off : 0 ~ 1V Load 3515% or RTH250c Fan The psu turns on : 3.3 ~ 5.6 V psu turn off : 0 ~ 1V Load 3515% or RTH250c FanThe psu turns on : 3.3 ~ 5.6 V psu turn off : 0 ~ 1V Load 3515% or RTH250c Fan -40 ~ +70c (Refer to "Reduction Curve") -40 ~ +70c (Refer to "Reduction Curve")-40 ~ +70c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH -40 ~ +85℃, 10 ~ 95% RH-40 ~ +85℃, 10 ~ 95% RH 0.03%/c (0 ~ 50 ° c) 0.03%/c (0 ~ 50 ° c)0.03%/c (0 ~ 50 ° c) 10 ~ 500 hz, 5 G, 10 min./1cycle, 60min. each along X, y, Z axes 10 ~ 500 hz, 5 G, 10 min./1cycle, 60min. each along X, y, Z axes10 ~ 500 hz, 5 G, 10 min./1cycle, 60min. each along X, y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approvedUL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVACI/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteriaCompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria 140.6 K hrs min.MIL-HDBK-217F (25c) 140.6 K hrs min.MIL-HDBK-217F (25c)140.6 K hrs min.MIL-HDBK-217F (25c) 218*105*63.5 mm (L*W*H) 218*105*63.5 mm (L*W*H)218*105*63.5 mm (L*W*H) 1.5 Kg; 8pcs/13Kg/1.34 CUFT 1.5 Kg; 8pcs/13Kg/1.34 CUFT1.5 Kg; 8pcs/13Kg/1.34 CUFTNOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in 4. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in4. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in a 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how to a 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how toa 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how to to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com) to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com) 5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.File name:HRP-600-SPEC2015-07-06 File name:HRP-600-SPEC2015-07-06File name:HRP-600-SPEC2015-07-06