Orario di servizio: Lunedì a Venerdì 9:00-18:00
HBG-240-60B - HBG-240-60B MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 60 VDC / 4.0A, IP67, for in- an..
Disponibile Prodotto più richiesto

HBG-240-60B

HBG-240-60B MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 60 VDC / 4.0A, IP67, for in- an..

$0.00USD
4162 in magazzino
Specifiche chiave
Nome:HBG-240-60B
Stato:Recommended Model
Azione:Yes
Formato:Box
Informazioni fornitore
MEANWELL
MEANWELL
Prodotti: 6448
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico

Specifiche tecniche

ParametroValore
NomeHBG-240-60B
StatoRecommended Model
AzioneYes
FormatoBox
SerieHBG-240-B
Oscuramento1-10V, Resistance 0-100K, PWM Signal 10V
ApprovazioniCCC, CE, ENEC, UL
Potenza (W)240,00
SottoformatoIP67
Larghezza (mm)191.50
Altezza (mm)69.00
Ingresso CA Max305,00
Ingresso CA Min90,00
ApplicazioniLighting
ProduttoreMEAN WELL
Tipo di prodottoLED Driver
Isolamento (V)3.750,00
Potenza di picco (W)Two hundred forty
Connettore di ingressoCable
Frequenza di ingresso50 Hz, 60 Hz
Lungo/Sfondo191.50
Descrizione lungaLED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format, round, plastic, patented, waterproof,IP67.Input range90-305Vca47-63Hz.Output in constant current4A.Range of output voltage with current mode constant36 to 60Vccaccording to demand load.Power:240W.Efficiency typical:93,5%.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0,95to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+75ºC.Dimensions (Diameter x Height):191,5 x 69mm.5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.You can also work in voltage mode constant giving a fixed voltage of 60V if the load is powered at constant voltage and does not overcome the maximum output power.With shell circular plastic IP67. The series HBG is specially designed for the bells and LED spotlights, scenarios, and bays. Intended for applications in dry, damp or wet, both in exterior and in interior. Input class I with grounding.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver.
Connettore di uscitaCable
Tipo di ingresso CASingle-phase
Garanzia (anni)5,00
Paese di origineChina
Corrente di uscita mAFour thousand
Intensità di uscita minima (mA)4.000,00
Intensità di uscita massima (mA)4.000,00

Descrizione del prodotto

More details
Caratteristiche principali
  • Qualità di grado industriale
  • Conforme RoHS
  • Certificato CE
  • Garanzia di 1 anno

Dettagli tecnici

LED driver dimmable.

Documenti del prodotto

Scheda tecnica

Specifiche tecniche e dati di prestazione

Manuale utente

Guida di installazione e utilizzo

Top