G89111120

Light Intensity SensorType G 8911 1120Duline®FieldbusInstallationbus• AnaLink transmitter with built-in light intensity sensor• Measuring range:A: 5-5000 LUX, B: 3000-300.000 LUX• Uses only 1 channel• Channel coding by GAP 1605• Easily mountable• Supplied by Dupline®Product DescriptionOrdering KeyG 8911 1120The analog lighttransmitter G89111120 makes it possible to convert analog light values to be transmitted on the Dupline®bus.The design of the LUX sen- sor makes it possible to mount the sensor discreetly, e.g. on walls.No external power supply is required, since the sensor is supplied from the Dupline® signal wires.Type: Dupline® LUX- housing TransmitterNo. of ChannelsNo. of InputsType SelectionSupply Ordering no.By Dupline®G 8911 1120Supply SpecificationsPower SupplySupplied by Dupline®Rated operational current < 4 mAGeneral SpecificationsChannel programming GAP 1605Channel assignment1 channel, freely programmableEnvironmentDegree of protection IP 44Operating temperature -10 to +60°C (14 to +140°F)ConnectionScrew terminal Pin 1: Dupline®Pin 2: GNDSensor SpecificationsLight measuring range5 LUX to 300 kLUX Characteristic deviation-20% to + 20% Measuring errror over temp. range -30% to + 30% Response time6s to 34sHousingMaterialENSTO Cubo D 050504Housing Lexan (Polycarbonate) Plug NylonColor Translucent / OffwhiteDimensions (W x H x D) 55 x 53 x 36 mmSettingsRange A: 5-5000 LUXRange B: 3000-300.000 LUXRange is changed by switchSpecifications are subject to change without notice (14.05.2008) 1Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group