EPS-15-7.5

15 W Single Output switching Power supply EPS-15series 15 W Single Output switching Power supply EPS-15series15 W Single Output switching Power supply EPS-15series Features : Features :Features : UniversalAC input / Full range UniversalAC input / Full rangeUniversalAC input / Full range Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltageProtections: short circuit / Overload / Over voltage Cooling by free air convection Cooling by free air convectionCooling by free air convection 1.8"x2.5" compact size 1.8"x2.5" compact size1.8"x2.5" compact size Do not load powerconsumptione0.3w Do not load powerconsumptione0.3wDo not load powerconsumptione0.3w 3 years warranty 3 years warranty3 years warranty SPECIFICATION SPECIFICATIONSPECIFICATION MODEL EPS-15-3.3 MODEL EPS-15-3.3MODEL EPS-15-3.3 EPS-15-5EPS-15-7.5 EPS-15-5EPS-15-7.5EPS-15-5EPS-15-7.5 EPS-15-12 EPS-15-12EPS-15-12 EPS-15-15EPS-15-24EPS-15-27 EPS-15-15EPS-15-24EPS-15-27EPS-15-15EPS-15-24EPS-15-27 EPS-15-36 EPS-15-36EPS-15-36 EPS-15-48 EPS-15-48EPS-15-48 DC VOLTAGE RATED CURRENT RANGE RATED POWER DC VOLTAGE RATED CURRENT RANGE RATED POWERDC VOLTAGE RATED CURRENT RANGE RATED POWER 3.3 V 3.3 V3.3 V 3A 3A3A 0 ~ 3.3 0 ~ 3.30 ~ 3.3 9.9 W 9.9 W9.9 W 5V7.5V 5V7.5V5V7.5V 3A2A 3A2A3A2A 0 ~ 3.3A0 ~ 2.2 0 ~ 3.3A0 ~ 2.20 ~ 3.3A0 ~ 2.2 15W15W 15W15W15W15W 12V 12V12V 1.25 to 1.25 to1.25 to 0 ~ 1.38 A 0 ~ 1.38 A0 ~ 1.38 A 15W 15W15W 15V24V 27V 15V24V 27V15V24V 27V 1A0.625A0.56A 1A0.625A0.56A1A0.625A0.56A 0 ~ 1.1A0 ~ 0.69A0 ~ 0.615 A 0 ~ 1.1A0 ~ 0.69A0 ~ 0.615 A0 ~ 1.1A0 ~ 0.69A0 ~ 0.615 A 15W 15W15.12W 15W 15W15.12W15W 15W15.12W 36V 36V36V 0.42 A 0.42 A0.42 A 0 ~ 0.46 A 0 ~ 0.46 A0 ~ 0.46 A 15.12 W 15.12 W15.12 W 48V 48V48V 0.313 A 0.313 A0.313 A 0 ~ 0.344 A 0 ~ 0.344 A0 ~ 0.344 A 15.02 W 15.02 W15.02 W OUTPUT OUTPUTOUTPUT Maximum LOAD(10 sec.) Note.610.89 W Maximum LOAD(10 sec.) Note.610.89 WMaximum LOAD(10 sec.) Note.610.89 W RIPPLE & NOISE (max.) Note.2 50mVp-p RIPPLE & NOISE (max.) Note.2 50mVp-pRIPPLE & NOISE (max.) Note.2 50mVp-p 16.5 16.5 W W 16.5 16.5 W W16.5 16.5 W W 50mVp-p 80mVp-p 50mVp-p 80mVp-p50mVp-p 80mVp-p 16.56 W 16.56 W16.56 W 80mVp-p 80mVp-p80mVp-p 16.5 W 16.56 W 16.6 W 16.5 W 16.56 W 16.6 W16.5 W 16.56 W 16.6 W 100mVp-p 150mVp-p 180mVp-p 100mVp-p 150mVp-p 180mVp-p100mVp-p 150mVp-p 180mVp-p 16.56 W 16.56 W16.56 W 200mVp-p 200mVp-p200mVp-p 16.51 W 16.51 W16.51 W 200mVp-p 200mVp-p200mVp-p VOLTAGE ADJ. RANGE of VOLTAGE ADJ. RANGE ofVOLTAGE ADJ. RANGE of 3.1 ~ 3.6 V 3.1 ~ 3.6 V3.1 ~ 3.6 V 4.75 ~ 5.5 V 7.13 ~ 8.25 V 4.75 ~ 5.5 V 7.13 ~ 8.25 V4.75 ~ 5.5 V 7.13 ~ 8.25 V 10.8 ~ 13.5 V 10.8 ~ 13.5 V10.8 ~ 13.5 V 13.5 ~ 16.5 V 21.6 ~ 27V24.3 ~ 29.7 V 13.5 ~ 16.5 V 21.6 ~ 27V24.3 ~ 29.7 V13.5 ~ 16.5 V 21.6 ~ 27V24.3 ~ 29.7 V 32.4 ~ 39.6 V 32.4 ~ 39.6 V32.4 ~ 39.6 V 43.2 ~ 52.8 V 43.2 ~ 52.8 V43.2 ~ 52.8 V VOLTAGE TOLERANCE Note.32.0% VOLTAGE TOLERANCE Note.32.0%VOLTAGE TOLERANCE Note.32.0% 2.0% 2.0% 2.0% 2.0%2.0% 2.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0% 1.0% 1.0%1.0% 1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATIONLINE REGULATION LOAD REGULATION 0.5% 0.5%0.5% 1.0% 1.0%1.0% 0.5% 0.5% 0.5% 0.5%0.5% 0.5% 1.0% 1.0% 1.0% 1.0%1.0% 1.0% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5% 0.5% 0.5%0.5% 0.5% 0.5% 0.5% 0.5% 0.5%0.5% 0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% SETUP, RISE TIME HOLD TIME (Typ.) SETUP, RISE TIME HOLD TIME (Typ.)SETUP, RISE TIME HOLD TIME (Typ.) 1000ms, 30ms/230VAC2000ms, 30ms/115VAC at full load 1000ms, 30ms/230VAC2000ms, 30ms/115VAC at full load1000ms, 30ms/230VAC2000ms, 30ms/115VAC at full load 50ms/230VAC16ms/115VAC at full load 50ms/230VAC16ms/115VAC at full load50ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC 120 ~ 370VDC VOLTAGE RANGE Note.5 85 ~ 264VAC 120 ~ 370VDCVOLTAGE RANGE Note.5 85 ~ 264VAC 120 ~ 370VDC INPUT INPUTINPUT FREQUENCY RANGE EFFICIENCY (Typ.) FREQUENCY RANGE EFFICIENCY (Typ.)FREQUENCY RANGE EFFICIENCY (Typ.) 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz 75% 75%75%78% 81% 78% 81%78% 81%82% 82%82%83% 83% 84% 83% 83% 84%83% 83% 84%85% 85%85%85% 85%The 85% of PROTECTION PROTECTIONPROTECTION ENVIRONMENT ENVIRONMENTENVIRONMENT SECURITY and SECURITY andSECURITY and AC CURRENT (Typ.) AC CURRENT (Typ.)AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT INRUSH CURRENT (Typ.) THE LEAKAGE CURRENTINRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVER LOAD OVER LOADOVER LOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.OVER VOLTAGE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATIONOPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY STANDARDS WITHSTAND VOLTAGESAFETY STANDARDS WITHSTAND VOLTAGE 0.4 A/115VAC 0.2 A/230 VAC 0.4 A/115VAC 0.2 A/230 VAC0.4 A/115VAC 0.2 A/230 VAC COLD START 45A/230VAC COLD START 45A/230VACCOLD START 45A/230VAC <1mA/240VAC <1mA/240VAC<1mA/240VAC 115 ~ 150% rated output power 115 ~ 150% rated output power115 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removedProtection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.85 V 5.6 ~ 6.75 V 8.63~ 10.1V13.8 ~ 16.2 V 17.25 ~ 20.25V27.6 ~ 33V 31.05 ~ 36.45 V 39.7 ~ 46.8 V 55.2 ~ 65.8 V Protection type :Shut down o/p voltage,Clamping by zener diode 3.8 ~ 4.85 V 5.6 ~ 6.75 V 8.63~ 10.1V13.8 ~ 16.2 V 17.25 ~ 20.25V27.6 ~ 33V 31.05 ~ 36.45 V 39.7 ~ 46.8 V 55.2 ~ 65.8 V Protection type :Shut down o/p voltage,Clamping by zener diode3.8 ~ 4.85 V 5.6 ~ 6.75 V 8.63~ 10.1V13.8 ~ 16.2 V 17.25 ~ 20.25V27.6 ~ 33V 31.05 ~ 36.45 V 39.7 ~ 46.8 V 55.2 ~ 65.8 V Protection type :Shut down o/p voltage,Clamping by zener diode -30 ~ +70c (Refer to "Reduction Curve") -30 ~ +70c (Refer to "Reduction Curve")-30 ~ +70c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH -40 ~ +85℃, 10 ~ 95% RH-40 ~ +85℃, 10 ~ 95% RH 0.03%/c (0 ~ 50 ° c) 0.03%/c (0 ~ 50 ° c)0.03%/c (0 ~ 50 ° c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approvedUL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVACI/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC EMC EMCEMC INSULATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH INSULATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RHINSULATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH (Note 4) (Note 4)(Note 4)OTHER OTHEROTHER EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC EMISSION EMC IMMUNITY MTBF DIMENSIONEMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGINGPACKAGING Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level, criteria Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level, criteriaCompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level, criteria 824.6 Khrs min.MIL-HDBK-217F (25c) 824.6 Khrs min.MIL-HDBK-217F (25c)824.6 Khrs min.MIL-HDBK-217F (25c) 63.5*45.7*24 mm (L*W*H) 63.5*45.7*24 mm (L*W*H)63.5*45.7*24 mm (L*W*H) 0.057 Kg; 120pcs/ 7.84 Kg/0.97 CUFT 0.057 Kg; 120pcs/ 7.84 Kg/0.97 CUFT0.057 Kg; 120pcs/ 7.84 Kg/0.97 CUFTNOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. EMC directives.EMC directives. 5. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details. 5. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details.5. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details. 6. 33% duty cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower. 6. 33% duty cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower.6. 33% duty cycle maximumwithin every 30 seconds. Average output powershould does not exceed the ratedpower.File name:EPS-15-SPEC2015-07-17 File name:EPS-15-SPEC2015-07-17File name:EPS-15-SPEC2015-07-17