Disponibile Prodotto più richiesto
ELGT-150-C1050AB
ELGT-150-C1050AB MEANWELL AC-DC Class II Single output LED Driver (CC) with PFC, Output 107VDC / 1.4A, cable..
$0.00USD
3281 in magazzino
Specifiche chiave
Nome:ELGT-150-C1050AB
Stato:New
Formato:Box
Serie:ELGT-150-C-AB
Informazioni fornitore
MEANWELL
Prodotti: 6448
Di solito spedito entro 2-3 giorni lavorativi
Qualità garantita
Spedizione veloce
Supporto tecnico
Specifiche tecniche
| Parametro | Valore |
|---|---|
| Nome | ELGT-150-C1050AB |
| Stato | New |
| Formato | Box |
| Serie | ELGT-150-C-AB |
| Oscuramento | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| Approvazioni | CCC, CE, EAC, ENEC, MM |
| Potenza (W) | 150,10 |
| Sottoformato | IP65 |
| Larghezza (mm) | 63.00 |
| Altezza (mm) | 35.50 |
| Ingresso CA Max | 305,00 |
| Ingresso CA Min | 100,00 |
| Applicazioni | Lighting |
| Produttore | MEAN WELL |
| Tipo di prodotto | LED Driver |
| Isolamento (V) | 3.750,00 |
| Potenza di picco (W) | 150.1 |
| Connettore di ingresso | Cable |
| Frequenza di ingresso | 50 Hz, 60 Hz |
| Lungo/Sfondo | 219.00 |
| Descrizione lunga | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP65.Input range100-305Vca47-63Hz.Output in constant current1050mA.Adjustable by external potentiometer (525-1050mA).Range of output voltage with current mode constant72 to 143Vccaccording to demand load.Power:150,1 W.Efficiency typical:92%.Potentiometer:This model incorporates 1 external potentiometer that allows us to regulate the maximum output current.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Class II with functional earth for EMC.Factor corrector, power>0.95to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-40ºCup+90ºC.Dimensions (Length x Width x Height):219 x 63 x 35.5 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.In this version AB, the output current can be adjusted byexternal potentiometerlocated in the housing of the source, in addition to having regulation 0-10V/1-10V, 10V PWM, or resistance.The series ELGT are LED drivers, class II with functional earth for EMC. The cabinet itself has a double insulation improve the protection against lightning and transients without the use of cable earth.With metal housing IP65. The series ELGT has a high efficiency designed for applications of public lighting, architectural, outdoor or any application of LED lighting need a driver of high quality.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Connettore di uscita | Cable |
| Tipo di ingresso CA | Single-phase |
| Garanzia (anni) | 5,00 |
| Paese di origine | China |
| Corrente di uscita mA | 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050 |
| Intensità di uscita minima (mA) | 525,00 |
| Intensità di uscita massima (mA) | 1.050,00 |
Descrizione del prodotto
More details
Caratteristiche principali
- Qualità di grado industriale
- Conforme RoHS
- Certificato CE
- Garanzia di 1 anno
Dettagli tecnici
LED driver dimmable.
Documenti del prodotto
Scheda tecnica
Specifiche tecniche e dati di prestazione
Manuale utente
Guida di installazione e utilizzo
