


| Parametro | Valore |
|---|---|
| Fiber amplifierconnector | |
| PNP | 53 µs for operation and 55 µs for reset |
| Articolo | Order code (for pre-wired types with 2 m cable length) |
| Forma | Type |
| Funzioni | Power tuning |
| Uscita NPN | PNP output |
| Uscita PNP | E3X-DAH41-S, E3X-DAH8-S |
| Tempo di risposta | Super-high-speed mode |
| Modalità standard | 1 ms for operation and reset respectively |
| luce infrarossa | E3X-DAH11-S 2M |
| Funzione timer | Select from OFF-delay, ON-delay, or one-shot timer. 1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| Display digitali | Incident level + threshold or user specific |
| Circuiti di protezione | Power supply reverse polarity protection, output short circuit protection, mutual interference prevention |
| Impostazione della sensibilità | Teaching and digital up/down keys |
| Grado di protezione | IEC 60529 IP50 (with protective cover attached) |
| Modalità ad alta risoluzione | 4 ms for operation and reset respectively |
| Tensione di alimentazione | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| Sorgente luminosa (lunghezza d'onda) | Infrared LED |
| Luce infrarossa (connettore amplificatore in fibra)1 | E3X-DAH6-S |
| Cavo in PVC da 30 cm con connettore M8 (4 pin) | E3X-CN21-M3J-2 0.3M |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo