


| Parametro | Valore |
|---|---|
| Nome | DR-RDN20 |
| Stato | Do not Use for New Designs |
| Azione | Yes |
| Formato | Din Rail |
| Serie | DR-RDN20 |
| Approvazioni | CE, UL |
| Potenza (W) | 480,00 |
| Sottoformato | Narrow |
| Larghezza (mm) | 55.50 |
| Altezza (mm) | 125.20 |
| Intervallo di input | +/-15% |
| Applicazioni | Industrial, Telecommunications |
| Ingresso CC Max | 28,00 |
| Ingresso CC Min | 21,00 |
| Produttore | MEAN WELL |
| Tipo di prodotto | Module Redundancy |
| Isolamento (V) | 500,00 |
| Tensione di uscita | 24,00 |
| Potenza di picco (W) | Four hundred eighty |
| Gamma di ingresso CC | 21, 22,5, 24, 25,2, 28 |
| Connettore di ingresso | Screw-Type |
| Lungo/Sfondo | 100.00 |
| Descrizione lunga | Module for parelización and redundancy.Format to install on a Din rail.Input voltage range21-28Vcc.Range of input current2 x 0-20A.Output voltage equal to the input voltage. Voltage drop between input and output of 2V with 2 inputs 20A.Output intensity20A.Power:480W.Working temperature: from-40up+70 ° Cof ambient temperature.Dimensions (Width x Height x depth) [mm]:55,5 x 125,2 x 100mm.3 years warrantyManufacturer: MEAN WELL.The module DR-RDN20 is a device to create redundant systems 1+1 and N+1 or for parallel power sources. It has two inputs to connect two sources of different power up to 20 amps and offers an output of up to 20 ampsIn critical applications we use redundancy, by putting several sources of supply so that in the event of a failure, the system is still operating. The problem is that if one of the sources fails, and is output in short-this is a load for the other power sources and causes the system to fail, even leaving a source that is not damaged. |
| Connettore di uscita | Screw-Type |
| Garanzia (anni) | 3,00 |
| Paese di origine | China |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo