CS1W-DRM21-V1

CS-Series communication units Rack PLCOpen to any communication, standard or user-definedCS1 provides both standardised open networks interfaces, and cost efficient, high-speed proprietary network links. Datalinks between PLCs, or to higher-level informa- tion systems can be made using Serial or Ethernet links, or the easy-to-use Controller Link network.Omron supports the 2 major field networks, DeviceNet and PROFIBUS-DP. For high-speed field I/O, Omron's own CompoBus/S offers an unsurpassed ease of installation. Fully user-configurable serial and CAN-based communication can be used to emulate a variety of application-specific protocols. EtherNet/IP units provide data link func- tions to share large amounts of data between PLCs. The PROFINET-IO controller to-gether with the SmartSlice modular I/O system offers ethernet-based I/O with controller- and network redundancy.Ordering informationType Ports Protocols Unit class Remarks Connection type Order codeSerial 2 × RS-232C CompoWay/F, Host Link, NT link, Modbus, CPU bus unit – 9-pin D-Sub CS1W-SCU21-V1User-definedSerial 2 × RS-232C/RS-485 CompoWay/F, Host Link, NT link, Modbus, CPU bus unit – 9-pin D-Sub CS1W-SCU31-V1User-definedSerial 2 × RS-232C CompoWay/F, Host Link, NT link, Modbus, CPU option board – 9-pin D-Sub CS1W-SCB21-V1User-definedSerial 1 × RS-232C +1 × RS-422/RS-485CompoWay/F, Host Link, NT link, Modbus, CPU option board – 9-pin D-Sub CS1W-SCB41-V1User-definedGP-IB Master/Slave selectable GP-IB instrument communicationEthernet 1 × 100 Base-Tx UDP, TCP/IP, FTP server,SMTP (e-mail), SNTP (time adjust), FINS routing, socket serviceSpecial I/O unit – GP-IB CS1W-GPI01CPU bus unit – RJ45 CS1W-ETN21Controller link 2-wire twisted pair Omron proprietary CPU bus unit – 2-wire screw + GND CS1W-CLK23Optical HPCF – 2 × HPCF connector CS1W-CLK13Optical graded-index fiber – 4 × ST connector CS1W-CLK53EtherNet/IP 1 × 100 Base-Tx EtherNet/IP, UDP, TCP/IP, FTP server, SNTP, SNMPCPU Bus unit 31 mm RJ45 CS1W-EIP21DeviceNet 1 × CAN DeviceNet CPU bus unit – 5-p detachable CS1W-DRM21-V1CompoNet 4-wire, data + power to slaves CompoNet (CIP-based) Special I/O unit – 4-p detachable IDCCS1W-CRM21(Master)or screwCompoBus/S 2-wire (Master) Omron proprietary Special I/O unit – 2-wire screw +2-wire powerCS1W-SRM21PROFIBUS-DP 1 × RS-485 (Master) DP, DPV1 CPU bus unit – 9-pin D-Sub CS1W-PRM21CAN 1 × CAN CANopen, User-defined CPU bus unit – 5-p detachable CS1W-CORT21PROFINET IO 1 × 100 Base-TxPROFINET IO controllerFINS UDP CPU bus unit – RJ45 CS1W-PNT21PROFIBUS-DP 1 × RS-485 (Slave) DP C200H specialI/O unitC200H units cannot be used on CS1D systems9-pin D-Sub C200HW-PRT21AccessoriesDescription Connection type Order codeRS-232C to RS-422/RS-485 signal converter. Mounts directly on serial port. 9-pin D-sub to screw clamp CJ1W-CIF11 terminalsController link PCI board with support software PCI, wired CLK 3G8F7-CLK23-E Controller link PCI board with support software PCI, HPCF connectors 3G8F7-CLK13-E Controller link PCI board with support software PCI, ST connectors 3G8F7-CLK53-E Controller link repeater unit (wire to wire) Screw - Screw CS1W-RPT01Controller link repeater unit (wire to HPCF fiber) Screw - HPCF connector CS1W-RPT02Controller link repeater unit (wire to graded-index glass fiber) Screw - ST connector CS1W-RPT03PROFIBUS DP to RS-422/RS-485 Serial Gateway. User-configurable, with Omron protocols built-in. 9-pin D-sub to screw clamp PRT1-SCU11 terminalsPROFINET IO + ModBus/TCP to Modbus/RTU (RS-485) Gateway. 3 × RJ45 to screw clamp terminalsEJ1N-HFU-ETNNote: For Ethernet Cables and Accessories, see page 8143