CA30CAN25PCTA

Proximity Sensors Capacitive Thermoplastic Polyester Housing Types CA30CAN/CAF.....• 4TH Generation TRIPLESHIELDTM• Adjustable sensing distance: 2 - 20 mm Flush or4-30 mm Non-flush• Protection: short-circuit, transients and reverse polarity• Dust and humidity compensation• Dust or Temperature alarm output• Rated operational voltage: 10-40 VDC• Output: DC 200 mA, NPN or PNP• Standard Output: NO and NC• LED indications for Power-supply, Output and Stability• IP67, IP68, IP69K, Nema 1, 2, 4, 4X, 5, 6, 6P, 12• Cable and M12 connector versions availableProduct DescriptionOrdering KeyCapacitive proximity switchCA30CAN25NAM1TheCA30CA..capacitiveproximity switches feature an improved 4THGenera- tion TRIPLESHIELDTM tech- nology. Furthermore, these sensors feature increased immunity to electromagnetic inteference(EMI),especial- ly to frequency drives. Not only does 4THGeneration TRIPLESHIELDTM feature anincreasedEMI,but it alsoincreasestheimmuni- ty to humidity and dust. The implementation of stability indication eases the setup procedure as both Stable ON and Stable OFF positions areindicatedby the Green andyellow LEDs.The sensing distance is increased by 20 – 25 % allowing room for additional stable detection.The Dust Alarm function gives an early warningthat the sensing surroundings have to be cleaned.The Temperature alarm func- tion raises an alarm if the sensing surface goes beyond60 degree celcius.The sensor housing is featur- ing IP69K as well as approval by ECOLABfor cleaning- and disinfection agents.Housing diameter (mm) Housing material Housing length Detection principleRated operating dist. (mm) Output typeOutput configurationConnection typeType SelectionHousingSensorOutputOutput Connection Rated operatingOrdering no.Ordering no.Ordering no. diameter type type functiondistance (Sn)StandardDust alarmTemperature alarmM 30FlushNPN NO+NC Cable0 - 16 mmCA30CAF16NAM 30FlushNPN NO+NC M12 Plug 0 - 16 mmCA30CAF16NAM1M 30Flush PNP NO+NC Cable0 - 16 mmCA30CAF16PAM 30FlushPNP NO+NC M12 Plug0 - 16 mmCA30CAF16PAM1M 30Flush PNP NO Cable0 - 16 mm CA30CAF16PODUCA30CAF16POTA M 30Flush PNP NC Cable0 - 16 mm CA30CAF16PCDUCA30CAF16PCTA M 30Flush PNP NC M12 Plug0 - 16 mm CA30CAF16PCM1DUM 30Non-FlushNPN NO+NC Cable0 - 25 mmCA30CAN25NAM 30Non-FlushNPN NO+NC M12 Plug 0 - 25 mmCA30CAN25NAM1M 30Non-Flush PNP NO+NC Cable0 - 25 mmCA30CAN25PAM 30Non-FlushPNP NO+NC M12 Plug0 - 25 mmCA30CAN25PAM1M 30Non-Flush PNP NO Cable0 - 25 mm CA30CAN25PODUCA30CAN25POTAM 30Non-Flush PNP NC Cable0 - 25 mm CA30CAN25PCDUCA30CAN25PCTASpecifications EN 60947-5-2Rated operating distance (Sn)Non-flush mounted sensor0 - 25 mm (factory setting25 mm),(ref. target 75x75 mm ST37,1 mm thick, grounded) Flush mounted sensor0 - 16 mm (factory setting16 mm - non-flush mounted) (ref. target 48x48 mm ST37,1 mm thick, grounded)Sensitivity control Adjustable by potentiometerElectrical adjustment11 turns Mechanical adjustment16 turns Adjustable distanceFlush types 2 to 20 mmNon-flush types4 to 30 mmEffective operating dist. (Sr)0.9 x Sn ≤ Sr ≤ 1.1 x SnUsable operating dist. (Su) 0.85 x Sr ≤ Su ≤ 1.15 x SrSpecifications are subject to change without notice (16.06.2015) 1