


| Parametro | Valore |
|---|---|
| LED (green): Power / LED (yellow): (S1/S2) / LED (red): Failure | |
| EAN | 4048879063531 |
| PIN 1 | (+) |
| PIN 2 | Port 1...7: (NO)/(S2); Port 8: diagnostic |
| PIN 3 | (-) |
| PIN 4 | (NO)/(S1) |
| PIN 5 | (Earth) |
| eClass | 27279219 |
| Alloggiamento | Zinc die casting, matte nickel plated |
| Protezione | IP65, IP67, IP68 inserted and tightened (EN 60529) |
| Corrente totale | max. 10 A |
| Unità di imballaggio | 1 |
| Capacità di spunto | max. 1470 µF |
| Protezione dell'unità | Short-circuit, overload (PNP switching) |
| Blocco delle porte | Screw thread (M12×1 mm) |
| Uscita diagnostica | active high, max. load 25 mA, M23 - PIN 18 |
| Tensione di esercizio | 24 V DC (EN 61131-2) |
| Intervallo di temperatura | -20...+60 °C |
| paese di origine | CZ |
| Dimensioni A×L×P | 145×55×21 mm |
| Consumo attuale | max. 35 mA |
| numero della tariffa doganale | 85369010 |
| Descrizione funzionale | All M12 ports are current monitored regarding 0 V total current (contact 3), and are switched off in case of overload or short-circuit (self-resetting). Operating voltage remains the same. In case of a fault the DIAGNOSTIC signal “active high” to the PLC |
| Corrente di esercizio (contatto 3) | max. 2 A (shutoff 2.3...2.7 A) |
| Alimentazione richiesta con numero massimo di porte | min. 20 A |
Specifiche tecniche e dati di prestazione
Guida di installazione e utilizzo